Open Eye Mounting Kit For Trailer
Updated 01/04/2021 | Published 12/30/2020
Products Featured in This Question
Question:
What is the kit for mounting it do you have any photos of how to mount that spring onto the trailer frame. (Additional information: New construction for single axle trailer using e33SR slipper spring.)
asked by: Scott M
0
Expert Reply:
To mount leaf springs to your trailer you will only need the Redline # APS3SE hanger kit for your single axle trailer. If you additionally need U-Bolts to attach your springs to your axle just let me know if your axle is round or square and what diameter it is.
expert reply by:
Les D
0
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for 1-3/4" Slipper Springs - 1-1/2" Tall Front
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 1-3/4 Inch
- Single Axle
- Redline
more information >
Continue Researching
- Q&A: Recommended 2,000 lbs Axle w/ a 72" Hub-Face-to-Hub-Face Measurement
- Q&A: Looking For Axle For Boat Trailer With Hubs And Springs
- Q&A: How to Measure for a Replacement Axle, Hubs, and Leaf Springs for a Boat Trailer
- Q&A: What Torque Should Be Used For U-Bolt Nuts On Trailer Suspension
- Q&A: Replacement Tail Lights for a 2008 Featherlite 4926 Car Hauler Trailer
- Article: Slipper Spring Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Installation of Slipper Spring with Open Eye End
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Troubleshooting Brake Controller Installations
- Article: Best Boat Trailer Tires