RV Door Latch that Fits Larger Cutout Dimension

Question

Question:

Need to replace door lock/latch for Class C door. RV The opening is 5 X 4 3/4 Willing to go keyed or keyless. Suggestions? Solutions? Thank you,

asked by: Karen S

1

Helpful Expert Reply:

The RV door latch we offer that fits the biggest cut out is the Bauer part # BA64FR which fits a cutout of 5-1/4 inch by 4-1/2 inch.

expert reply by: Jameson C

1

Answer 1

Hey Lasalle, thanks for reaching out! We have a good variety of replacement door handles you can use, but I'm not sure if any of them have the exact same dimensions as what came on your Airstream. The Bauer EM RV Entry Door Lock for Motorhomes…

view full answer...

Answer 2

The Bauer Products Motorhome Door Lock #BA64FR is the closest we have to the cutout size you have. This door lock requires a 5-1/4" wide x 4-1/2" tall opening so you will need to widen your opening by 1/2'. This door does have a…

view full answer...

Answer 3

Thanks for reaching out, Doran! The toggle switch for your FIC-ETJ3500 is pretty unique and it looks like for a direct replacement you'll need to reach out to FIC Jack Services directly at 1-877-957-1501. You might consider looking at and…

view full answer...

Answer 4

The Progressive Dynamics PD9100L part #PD9160ALV is exactly what you are looking for. It's a lithium only battery charger that is rated for 60 amps so it would be perfect for you.

view full answer...

Answer 5

Hey Abby, the replacement RV door latch we offer that matches what you need the best would be the part #295-000019 that you referenced as fits the cut out size range of 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall. So you would…

view full answer...

Answer 6

We only have one replacement lens option which is the Replacement Amber Lens for Furrion Vision S Side Marker Light RV Cameras #C-FOS07TAPK-002 which fits on the Furrion Vision S #FCE48TASL, #FCE48TASL-05, and #FCE48TASL-07. If you find that your…

view full answer...

Answer 7

Possibly; you'll need to take some measurements as there are no specific door locks and handles for any specific RV. So measure the door thickness and cut out. For example, if you have a door that is 1-1/4" to 1-1/2" thick and a cutout…

view full answer...

Answer 8

I have some great replacement RV door latch options. The only one we offer that would come close to fitting such a large cutout is the Bauer Products Camper Door Lock part #BA65FR which fits up to 5-1/4" wide x 4-1/2" tall openings so…

view full answer...

Answer 9

Your cutout is just a little too big for the standard RV entry doors like the part #295-000019 that you referenced. It would need to be just 1/4 inch smaller in height and width to fit. Best option might be to try and modify the opening to make it a…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

RV Door Latch that Fits Larger Cutout Dimension

Product Page this Question was Asked From

Continue Researching