How To Wire Separate Taillight System Into Existing Wiring on 2000 Ford F250

Updated 12/12/2020 | Published 12/10/2020

Products Featured in This Question

Pollak 6 Pole to 4 Pole Connector Adapter

(77)

$12.93

2-to-3 Tail Light Converter for Towed Vehicles w/ Incandescent Tail Lights

(173)

$40.96

Question:

Recently converted the truck to a flatbed. I purchased lights that have a Brake, turn signal, running lights separate and would like to keep it that way. Is there such a module that can convert my existing tail light wires in the rear of the truck to work with these lights?

asked by: Jason

Expert Reply:

We have exactly what you're needing. You'll want to use the # 118158 converter. On the INPUT side of the converter, ground the white wire to the truck frame, connect the yellow wire to the left turn circuit and the green wire to the right turn circuit. On the OUTPUT side, the yellow wire connects to the left turn lamp, the green to the right turn and the red wire would be split and connect to the brake lamps. The running lamp circuit would bypass the converter.

expert reply by: Mike L