Hanger Kits to Use with 1-3/4 inch Wide Slipper Leaf Springs for Trailer
Updated 11/05/2020 | Published 11/04/2020
Products Featured in This Question
Question:
I have four #e33SR springs to mount on top of 2 3/8inch dia tandem axles to a trailer frame I am making. What hangers, equalizers, bolts shackles, etc do you recommend I use? Do I need equalizers?
asked by: Merle R
0
Product Page this Question was Asked From
etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 4300 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26-1/4 Inch Long
- Marine Grade
- etrailer
more information >
Continue Researching
- Q&A: Installation of Slipper Spring with Open Eye End
- Q&A: Replacement 26-1/2" Marine Grade Slipper Spring for a Boat Trailer
- Q&A: How Is the 32-Inch Length Measured on the CE Smith Trailer Fender # CES63WR?
- Q&A: Looking for Slipper Spring that has 1,500 lb Weight Capacity Per Spring
- Q&A: Is Bushing Required on Open Eye End of Slipper Spring
- Q&A: Recommended 26" Long 4-Leaf Double Eye Leaf Spring for a 4,000 lbs Axle on a Boat Trailer
- Q&A: Looking For 26" Long 4-Leaf Double Eye Leaf Spring For Saltwater Single Axle Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: What Is A Leaf Spring? (Everything You Need to Know About Trailer Leaf Suspension)
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams