Installing Black Bracket/Single Plug-N-Go Plug for Thin Line Trailer Clearance/Side Marker Lights
Updated 12/03/2012 | Published 11/28/2012
Products Featured in This Question
Question:
I have purchased the lights/lamps and Im ordering the black bracket and single plug-n-go plugs. How do I install these on my Hawk Trailer? Also do I need any additional wires, etc?
asked by: Raymond R
Expert Reply:
The lights have prongs that will fit into the sockets on the Plug-N-Go bracket, # A65PBPG. It grounds through the mounting hardware to the trailer frame. The other wire will need to connect to the trailer wiring coming in from the front of the trailer. If there is already wiring there then you will not need any additional wiring.
If you are completely re-wiring the trailer or building a trailer then you will need a wiring harness like # A35W42B for a 4-Way flat as an example.
Product Page this Question was Asked From
Black Bracket and Single Plug-N-Go Plug for Thin Line Trailer Clearance and Side Marker Lights
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Brackets
- Black
- Optronics
more information >
Continue Researching
- Shop: Tonneau Cover
- Video: In-Depth Review of the Optronics Thinline LED Trailer Fender Light
- Shop: Optronics Thinline LED Trailer Fender Light - Submersible - 2 Diodes - Red/Amber Lens
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Shop: Black Bracket and Single Wire Plug for Thin Line Series Trailer Clearance and Side Marker Lights
- Shop: Black Molded Fender Bracket for MC65ARB and MCL65ARB Trailer Fender Clearance Lights
- Q&A: Recommended Replacement for Optronics MCL61ARB
- Shop: Optronics Thinline LED Trailer Fender Light w/ Bracket - Submersible - 10 Diodes - Amber/Red Lens
- Shop: LED Trailer Fender Light w/ Mounting Bracket - Waterproof - 2 Diodes - Amber/Red Lens
- Shop: Black Molded ABS Mounting Bracket for Thin Line Series Clearance, Side Marker Lights
- Shop: Trailer Valet MV PRO Trailer Dolly w/ Chain Drive - 2" and 2-5/16" Hitch Ball - 12,000 lbs
- Q&A: Availaiblity of White Half Moon Trailer Vent
- Q&A: Mounting Bracket Options for Optronics Sealed, Thin Line Clearance Side Marker Light # MC65AB
- Article: Trailer Wiring Diagrams
- Q&A: Will Black Bracket and Single Wire Plug for Thin Line Series Lights Fit MCL63AB and MCL63RB
- Q&A: Butyl Tape To Seal Trailer Roof Panel Joint
- Article: Trailer Lighting Requirements
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Getting Side Marker Lights to Function as Turn Signals and Running Lights
- Q&A: Trailer Brakes No Longer Work After Driving With Breakaway Pin Pulled
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Tire Sizing
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft