Sunlite by Sun Valley Inc. 220FDBSL Trailer Electric Brake Assembly Replacement
Published 10/30/2020
Products Featured in This Question
Question:
Hi Jameson, Thank you for the help. I was able to get the name plate and contacted Dexter Axle. The trailer has two Dexter Axle P-12 SLR axles with a 2,200 lb capacity each. They said the 7" was common on this model. Would this be you brake assembly AKEBRK-2?
asked by: Matthew S
0
Expert Reply:
It would technically fit and would work but I'd worry the braking power wouldn't be adequate. Do you know the capacity of the axle you have and the brand? With that we might be able to come up with a better solution. Most likely not from us though as we don't have the size of assembly you have currently.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Electric Trailer Brake Assembly - 7" - Right Hand - 2,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 2000 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- etrailer
more information >
Continue Researching
- Q&A: Brake and Hub Compatibility for a 2,000-lb Trailer Axle with L44643 Bearings
- Article: Trailer Wiring Diagrams
- Q&A: Replacement 7 inch Brake Assembly for Fiat Elnagh 320 Motorhome
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Hub and Drum Assembly for AxleTek/etrailer 7 Inch Electric Trailer Brakes
- Q&A: Looking For Replacement For EB01-120 And EB01-125 Brake Assemblies
- Q&A: Hub and Drum and Brakes for Trailer With 2,000 lb Axles & Bearings L44649
- Q&A: What Is The Difference Between Redline Retainer Clips For Magnets On Electric Brakes
- Q&A: Replacement Hub/Drums and Brake Assemblies for 2004 Aliner Expedition Camper
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
Matthew S.
10/30/2020
Hi Jameson, Thank you for the help. I was able to get the name plate and contacted Dexter Axle. The trailer has two Dexter Axle P-12 SLR axles with a 2,200 lb capacity each. They said the 7" was common on this model. Would this be you brake assembly AKEBRK-2?