Installing Inno Wedge 660 Cargo Box on Toyota Rav 4

Published 08/27/2020

Question:

Im wanting to know if the Inno Wedge 660 cargo box will mount on top of the Toyota OEM crossbars on my 2019 Toyota RAV4 hybrid XLE these crossbars are slightly curved. Thanks.

asked by: Ken M

Expert Reply:

Yes, the Inno Wedge 660 Rooftop Cargo Box # INBRM660BK will easily install on your RAV4 and look great even though the roof rails and cargo rails have some curve to them. On the product page if you scroll down to the "Memory Mount Installation" section you will see the jaws that grip around the cross bar. This design allows for a lot of flexibility including your curved or arched rails. I have attached a link to Inno Wedge product page.

If your cargo box is mounted too far to the rear you may not have the convenience of fully opening the back hatch. However, If the measurement from the rear cross bar to the rear hatch is at least 12" then you will not have an issue. Additionally, the measurement from the front crossbar to rear cross bar must fall between 24" and 39".

expert reply by: Les D