Parts Needed to Flat Tow a 2011 Honda CR-V With a 2000 Winnebago and a Stowmaster 5000 Tow Bar

Published 10/11/2012

Products Featured in This Question

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

(2126)

$575.00

Roadmaster Universal Magnetic Tow Lights with 4-Way Flat Trailer Connector

(43)

$83.18

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs

(656)

$70.99

Roadmaster Even Brake Portable Flat Tow Brake System - Proportional

(56)

$1930.00

Question:

I have a 2000 35 foot Winebago class A motorhome I just bought a stow master 5000 and am wondering just what else I am going to need. I dont have the base plate or anything else.

asked by: Wayne B

Expert Reply:

There are 5 basic components that you need to flat tow your 2011 Honda CR-V. You need a tow bar like the Stowmaster 5000 that you purchased, base plates, safety cables, light kit and a supplemental braking system. You should also check your owners manual of your CR-V for any specific towing procedures that must be followed like pulling fuses or adding a lube pump.

For base plates, I recommend the Roadmaster EZ4 Base Plate Kit, # RM-521559-4, that you referenced. These base plates work with all Roadmaster tow bars and have removable arms for a normal look when you are not towing.

The next item that you need are safety cables, I recommend safety cables # RM-643. There are a few different options for a light kit. The easiest light kit to set up and use are the magnetic tow lights like # RM-2120. There are also hard wire kits and bulb and socket kits that are permanent installations. I have attached a help article on different tow light kits for you to review to see which one you like best.

The final item is a supplemental braking system. Most states now require towed vehicles to use a braking system. I recommend checking the local laws and regulations where you plan on traveling to see if a supplemental braking system is required. If you do need a supplemental braking system, then I recommend the Roadmaster Even Brake, # RM-9400. This is a proportional braking system that is easy to set up and use.