How To Determine If Brophy Drawbar BM96 Will Clear Bumper In Rise Position

Updated 07/14/2020 | Published 07/10/2020

Question:

What is the distance from the pin to the vertical segment? I’m trying to measure for bumper clearance. Thanks

asked by: Keenan M

Expert Reply:

If using the Brophy Drawbar part # BM96 in the rise position you'd need to have no more than 3" from the center of the hitch pin hole to the edge of the bumper. That is the distance from the center of the hitch pin hole to the start of the gusset. The distance from the center of the hitch pin hole to the back of the upright (excluding gusset) is 4-1/2".

expert reply by: Conner L