Parts Needed To Tow a Trailer With a 2011 Nissan Juke AWD

Updated 06/15/2020 | Published 06/11/2020

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(35)

$195.99

2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs

(3876)

$10.46

Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs

(2274)

$39.92

Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span

(2933)

$2.80

Question:

Hi, I am a newbie at trailers but would like to purchase one. I have a 2011 Nissan Juke AWD, and I want to tow a small trailer. Can you give me some options? I am ready to buy. Thank you! Trailer specs are below: 2” ball hitch Total Length: 14 feet Weight Approximate empty: 1200 lbs Weight Approximate gear, propane, and water: 1520 lbs Tongue Weight: 130 lbs Tongue Weight with 11-lb Propane Tank: 160 lbs Road Clearance: 8 to 10 inches Wheels: 14 inches

asked by: Colin M

Helpful Expert Reply:

In order to tow a trailer with a 2011 Nissan Juke AWD you'll need a trailer hitch, trailer wiring harness, and a ball mount/hitch ball. For a trailer hitch, I recommend the Curt Trailer Hitch Receiver part # C11088 which offers bolt-on installation and is assembled in the USA. Then for a trailer wiring harness, the T-One Vehicle Wiring Harness part # 118528 offers plug-in-play installation. For a ball mount, the Curt Drawbar for 1-1/4" Hitches part # C45520 is what you need to use along with the Curt Class I and II Pin and Clip part # F-4 and 2" Hitch Ball part # C40018.

expert reply by: Conner L