Determining Replacement Parts for Trailer Axle and Hub Fit
Updated 06/05/2020 | Published 06/03/2020
Question:
need to match spindle to hub
asked by: Robert K
0
Expert Reply:
To match the spindle to hub or hub to spindle will require learning the measurements of axle spindle and inner diameter of hub bearings. I recommend using a digital caliper like # PTW80157 to measure the spindle in the bearing a grease seal locations and the inner diameter of each bearing and grease seal.
I've attached a video as well as a photo to assist.
expert reply by:
Jason S
0
click to enlarge
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Dimensions of CES38WR Spindle
- Q&A: Looking For Replacement Leaf Springs For Sure-Trac Pro Series Trailer
- Q&A: Greasable Shackle Bolt that is 3-1/2 inch Long and 9/16 inch Diameter
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Q&A: Recommended Bearing Kit for a 3,500 lbs Axle on a Boat Trailer
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Q&A: Correct Replacement for UFP H-1377 Trailer Hub
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule
- Article: Trailer Lighting Requirements
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub