How to Remove the Ranch Hitch Adapter From a 5th Wheel Trailer King Pin

Updated 07/07/2025 | Published 07/21/2012

Products Featured in This Question

Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter

(227)

$599.98

Replacement Spanner Wrench for Ranch Hitch Coupler Adapter

(17)

$40.98

Question:

i need to remove the gooseneck and revert to a king pin fifth wheel hitch . i try to unscrew the base either way and it goes so far and stops i cant get it to come off please help

asked by: Edward P

Expert Reply:

Removal of a Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter # AM3100 is not exactly an easy task. Actually, it will take two strong men with a 4 foot cheater bar.

When the adapter is tightened onto the collars system on the king pin the connection is very solid and hard to break.

Once the bolts are removed from the trailer pin box, you will need the Spanner Wrench for Ranch Hitch Coupler Adapters, # AM3104, and a 4 foot cheater pipe, along with two full grown men to release the the adapter from the threaded collar. Initial tightening is done at 1200 foot pounds of torque, or as much torque as two men can generate.

Once the adapter is un-threaded, you may need to use a large socket, or other sturdy round item larger than the diameter of the king pin, and a hammer to unseat the threaded collar from the 2 half round wedges.

Check out the picture I attached that shows an exploded diagram of this product.

expert reply by: Jameson C