Wobble Replacement for 1985 Ez Roller Boat Trailer
Published 03/25/2020
Products Featured in This Question
Question:
I have an 1985 Ez roller boat trailer that needs new wobble roller wheels. I have pictures of the old ones on the trailer. I measured the wheels at the following deminsions: 4 1/2 inches round 3inch thick 1inch center shaft Can you tell me what size you have that will work for my trailer? I cant seem to find these exact measurements. Id be happy to have someone call me! In need of ordering asap!! Thanks
asked by: Troy
Expert Reply:
We have the non-marking part # YR500YW-8PEZ which fits the shaft you have and is a 1/2 inch taller than what you have but the same width. It would be a great option but would be just slightly larger. We don't have your exact size but this will work great.
Product Page this Question was Asked From
CE Smith Wobble Roller for Roller Bunks - 2-1/2" Diameter - 1/2" Shaft
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 1-7/8 Inch Wide
- 2-1/2 Inch Diameter
- Plastic
- Fits 1/2 Inch Shaft
- CE Smith
more information >
Continue Researching
- Q&A: Recommended Disc Brake Conversion Kit for a 2019 Grand Design Solitude 373FB
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Replacing Grease Lube Hubs with Oil Bath Hubs
- Q&A: Can Kodiak XL ProLube Kit Work on 7,000 lb. Idler Hubs
- Q&A: Could Kodiak XL ProLube Kit XLPROLUBE2440KIT Fit 7,000 lb Dexter D70 Hub
- Q&A: Can a Dexter Hub be Swapped from Grease to Oil Bath?
- Q&A: Converting 7,000 Pound Grease Hubs Over to Oil Bath Hubs
- Q&A: How To Convert from Grease to Oil Bath Hubs
- Article: Trailer Tire Sizing
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: Trailer Lighting Requirements
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer