Dimensions of Draw-Tite Max-Frame Trailer Hitch Receiver Part # 75034

Published 01/28/2020

Question:

I have a 1965 F100 which has a custom dual exhaust which flows close to the frame rails. The truck is standard height and has the simple small bumper. Can I get all the dimensions of the 75034 hitch so I can mock up some cardboard to see if it will fit without having to modify exhaust and bumper? I also want to make sure the hitch fits up close to the bumper. Thanks.

asked by: Alex P

Expert Reply:

I do have some dimensions of the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75034 which is a fit for a 1965 Ford F-100 and I have attached these for you below but I would not be able to provide a dimensional drawing as this is proprietary information that is not released by the manufacturer.

The distance from the frame to the top of the receiver tube opening is 5-5/8" which will allow you to determine how far under the rear bumper the receiver tube will sit. In regards to exhaust clearance, the hitch side plates are 5-1/4" tall. The distance between the mounting holes left to right is 31-13/16". If you need any other measurements please just let me know.

expert reply by: Conner L