Replacement Adapter Feet and Ball for the Demco 6194 Adapter for Chevy/GMC Prep Package

Question

Question:

Can I Get Replacement Adapter Feet and Ball for the Demco 6194 Adapter for Chevy/GMC Prep Package

asked by: Smith

1

Helpful Expert Reply:

Thank you for the pictures. That definitely helps us make sure you get the right parts!

The Adapter Foot with Stud # DE27ZR and Adapter Foot # DE59ZR are the two parts you're looking for to replace the feet on your Demco 5th Wheel Rail Adapter for Chevy/GMC OEM 5th Wheel Towing Prep Package - 6-1/2' Bed - 21K # DM6194. To replace the steel balls in the gooseneck connection on the Demco # DM6194 you'll want to use the .75 Steel Ball # DE39ZR.

expert reply by: Erik B

1

click to enlarge

Answer 1

I checked the install instructions for the Demco GM 8 ft bed fifth wheel rail adapter part #DM6206 and they show that the larger triangle on the top plate needs to be on the rear side of the truck bed. For the short bed version of this adapter part…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 5

Depending on what year, make, and model truck you have there is an option for installing a gooseneck hitch that will give you extra clearance when turning. Lets say you have a 2018 Chevy Silverado 2500. You can use the B&W Turnoverball System…

view full answer...

Answer 6

The actual puck itself is a standardized size between each brand so the only measurement that matters is the spacing of the pucks, which differs between each vehicle manufacturer. I've attached a diagram below with the spacings used by…

view full answer...

Answer 7

Hey Allie. The shank measures 2-1/2" wide on the Curt Weight Distribution Shank item #C17132. It's designed to fit 2-1/2" x 2-1/2" trailer hitches. The vertical part is 2" wide and works with most weight distribution systems.…

view full answer...

Answer 8

Hey Darcy, yes we do have an adapter that will work with both your Reese hitch and the OEM puck system of your 2026 Chevy Silverado with the part #C88KR. This adapts your OEM pucks to become the standard rails that your hitch needs. How do you like…

view full answer...

Answer 9

The mounting holes for the Bauer Products Locking Cam Latch #BA32FR are spread 2-13/16" horizontally for the top 2 holes and 3-3/4" from the center line of the top holes to the center of the bottom hole(see image). The mounting holes for…

view full answer...

Answer 10

Hey Ronnie, The crossbeam of the slider base on the B&W Patriot 5th Wheel Trailer Hitch w/ Slider #BWRVK3270 unfortunately sits too low and fights for the same space as the handles/side mounting plates of the Curt Rail Adapter #C88KR (16027) so…

view full answer...

Answer 11

Hey Adam, welcome back! Yes, the Roadmaster Comfort Ride Shock Absorbers can be installed without the leaf spring kit. Is this still for your 2013 CrossRoads Elevation TF-3612 with tandem 7k axles? Assuming it is, the #RM-2460 is the kit you need for…

view full answer...

Replacement Adapter Feet and Ball for the Demco 6194 Adapter for Chevy/GMC Prep Package

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching