Recommended Adapter Bar for 50 Pound Bike with 27" Handlebar to Seat Post Length  

According to SportRack, the capacity of their Frame Adapter Bar #SR0500 is 35 lbs. I've checked with our other bike rack manufacturers such as Thule, Yakima, Kuat and Swagman among others, and have found that the 35 lb capacity is typical.…

Kuat and bike rack manufacturers don't like to give that info out but will if needed. Reason being they don't want people trying to use their locks and hitch pins on bike racks they weren't tested on since that's…

We can get you set up with a bike rack that can carry both your Aventon Aventure and Aventon Pace 350, and since one has fenders and the other has a metal rack, what you'll need is a frame-mounted rack that uses hooks to grasp the bikes by…

I went to our warehouse and measured the two ends of the SportRack Bike Adapter Bar #SR0500. I found that the openings are 2-1/8-inch wide x 3-1/2-inch long so a bike seat post or handlebar stem up to 2-1/8-inches wide can be accommodated and will…

I took measurements of the Anti-Rattle Hitch Lock for Malone Cargo Carriers #MPG2174 for you and the bolt length is 4-1/4" and diameter is 1/2". Included is a review video for additional information.

The weight capacity for the Thule bike frame adapter bar part #TH982XT that you referenced is now 35 lbs. It may have been different at one point but currently Thule states it's 35 lbs. The best option you have will be the 50 lb Malone bike…

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

The best/affordable bike rack I have for your Specialized Como 4.0 Bike is the Saris Freedom 2 Bike Platform Rack part #SA4412B. The Saris Freedom 2 has a 60 lb per bike weight capacity and the unique frame clamp system is actually designed for bikes…

The best bang for your buck is the Hollywood Racks Sport Rider SE Platform Bike Rack #HLY84FR because it can hold the most amount of weight, the widest variety of bikes and can be put on almost any vehicle. It uses a frame hook so you don't have…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…