Which Bearing Buddy Fits CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks # CE48870

Question

Question:

Can the dust cap on over the bearings be replaced with a Buddy Bearing to keep out water when I launch my boat? If so, what is the size or part number for this product?

asked by: Mark L

0

Expert Reply:

The dust cap of the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks # CE48870 would be just as waterproof as a Bearing Buddy since they both install press-in to install. That said, the correct Bearing Buddy for this trailer would be the part # BB1980A.

expert reply by: Jameson C

0

Answer 1

Hey Doug, You can definitely swap out the 5' bunks on the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks #CE48870 with the 7' long replacement bunks #CE27845 for more support. I would just flip the front mounting brackets to have…

view full answer...

Answer 2

The options in a TruXedo Tonneau cover for your 2002 Ford Ranger 6-Foot Stepside Bed can be seen on the link provided. These include the cover #TX247101 that you referenced. Please note that the other cover you referenced #TX271101 is not a fit for…

view full answer...

Answer 3

The etrailer.com 3,200-Watt Portable Inverter Generator #333-0003 that you referenced is an excellent option and you are correct regarding the manufacturer. This particular unit compares very well to the Champion generator you're looking at. Like…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 8

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 9

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 10

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 11

Hey Ken, welcome back! So this is a really great question but at the end of the day the Curt A25 part #C16046 and the B and W Companion part #BWRVK3600 that both fit the OEM pucks of your 2026 Ram 3500 are really nice hitches that you can't go…

view full answer...

Which Bearing Buddy Fits CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks # CE48870

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching