What Is the Average PSI To Use Inside the Reese Goose Box Air Ride Coupler Adapter
Updated 01/03/2025 | Published 10/09/2019
Question:
What is the PSI range on the 20K Goose Box? The small cut-circle that indicates, minimal, standard, or max pressure does not tell me how much air I need to put in or take out. The circle indicator varies a lot when traveling and Im never sure if the air pressure is set correctly. According to instructions, the Standard is probably what I need set the majority of the time. So, when set at standard what would the PSI be ? Your answer would help me a great deal to get the best ride. Thanks
asked by: Sandy C
Helpful Expert Reply:
The correct psi to use in a Reese Goose Box Air Ride Coupler Adapter like part # RP85FR is going to vary by trailer. That said, you can start with 35-40 psi and then go from there to obtain the best combination of support and comfort. The max is 50 psi and the min is 5 psi so as long as you are between these two figures and happy with the support/comfort settings you are good to go.
Continue Researching
- Shop: Curt Helux Shock-Absorbing 5th Wheel Pin Box - Lippert Rhino - 24K GTW - 4,000 lbs TW
- Shop: Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box - Lippert 1621 and 1621 HD - 30,000 lbs - 6.5K TW
- Shop: Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box - Lippert Rhino - 30,000 lbs - 6.5K TW
- Q&A: Which Sidewinder Will Replace Lippert 1116 Pin Box
- Q&A: Recommended Air Spring Pressure for Reese Goose Box 5th-Wheel-to-Gooseneck Coupler RP94720
- Shop: Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor
- Shop: Curt Ball and Safety Chain Loops Kit for Ram Underbed Gooseneck Hitch - 30K
- Shop: Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs
- Video: Mount: Curt Ball and Safety Chain Loops Kit for Ram Underbed Gooseneck Hitch on a 2021 Ram 3500
- Search Results: trailer tires and wheels
- Video: Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor Review
- Shop: Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies
- Video: Set up: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide on a 2009 Chevrolet Kodiak
- Q&A: Is the TST TPMS Compatible With Factory Ram Systems
- Search Results: gooseneck hitch
- Search Results: rv corner trim
- Q&A: How to Reset Thermostat of Furrion Chill RV AC Unit
- Search Results: xfactor
- Search Results: morryde xfactor
- Search Results: morryde brace
- Search Results: dexter grease seal
- Q&A: Replacement Air Line Kit For Reese Goose Box 20000lbs
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Q&A: MORryde X-Factor Crossmember Fit for Standard Frame Hangers with Correct Track
- Video: All You Need to Know About the Landing Gear Set
- Video: Mount: Spacer Kit for Timbren Suspension Enhancement System on a 2022 Toyota Tundra
- Q&A: What is the Difference between Timbrens and SumoSprings for My 2022 Ram 1500 4x4?
- Video: An In-Depth Look at the SuperCoils Custom Suspension Coils
- Video: Timbren Rear Suspension Enhancement System-TDR1500DQ: The Breakdown
Barry
1/3/2025
Conner, I'm getting a lot of click clack bounce back it seem. The tge truck bonuses then the trailer bonuses it seems the rebound back and forth. Any suggestions?