Does Rhino-Rack Universal Load Assist # RR-RUSL Fit Inno Square Crossbars

Question

Question:

Is this compatible with INNO Square bars? Thanks!

asked by: Thomas J

1

Helpful Expert Reply:

Yes, the Rhino-Rack Universal Load Assist # RR-RUSL that you referenced is perfectly compatible with Inno square crossbars. I attached a review video for more info on this as well.

expert reply by: Jameson C

1

Answer 1

With the height of your truck camper at 7-1/2' tall I recommend using a Inno Kayak Lifter Load Assist #INA453. This will clamp onto your crossbars up to 3-1/2" wide and 1-1/8" tall and fits a crossbar spread of 27-39". Since it is…

view full answer...

Answer 2

There is a solution for you, but the issue with the BoatLoader EVO the crossbar spread as well as its 80 lb weight capacity, which is less than your 87 lb fishing kayak. Instead, for your 2011 Chevy Equinox with raised side rails I recommend the…

view full answer...

Answer 3

There are a couple things that you can try for fitting the Rhino-Rack Universal Load Assist #RR-RUSL on your crossbars with the J-style carriers installed. The first would be to try some of the different clamp sizes, the load assist should have come…

view full answer...

Answer 4

Hey Mark! Weigh Safe does not offer a locking pin for the True Tow #WS94RR hitch ball. I'm sure the thinking behind it is that you're either towing with a trailer hooked up so the ball can't be removed, or you aren't towing and store…

view full answer...

Answer 5

As a 5' 2" girl that has to load kayaks to test carriers here at etrailer, I understand the struggle. Here are my recommendations based off my experience. Your crossbars are set to fixed mounting points like the Rhino-Rack bars #RRRVP31 that…

view full answer...

Answer 6

Hello again, John. The Yakima BoatLoader EVO Telescoping Load Assist #Y04085 will only work with the Yakima Roundbar and Corebar crossbars. It will not work with the Yakima JetStream crossbars that I recommended earlier. Instead, I recommend using…

view full answer...

Answer 7

For your heavier Hobie Compass kayaks I recommend using either the etrailer J-Style Kayak Roof Rack w/ Tie-Downs #e98878 (weight rating 150 lbs) or the Swagman Exo Aero Saddle-Style Rooftop Kayak Roof Rack w/ Tie-Downs #S65145 (weight rating 100…

view full answer...

Answer 8

The best assisted kayak carrier that would fit the Thule crossbars on your 2020 Subaru Ascent would be the Thule Hullavator part #TH898 which allows you to load the kayaks at about waist level and then push it up onto the roof using the assisted gas…

view full answer...

Answer 9

Hey David, thanks for reaching out. Yes, we do have a bracket that can be used to mount recovery boards on a roof rack with T-slots. Take a look at the following: - Stow It Recovery Track Holder for Rhino-Rack Pioneer Platform, Reconn-Deck, and…

view full answer...

Does Rhino-Rack Universal Load Assist # RR-RUSL Fit Inno Square Crossbars

Featured Help Information

Miscellaneous Media

Continue Researching