Triple Axle Brake Line Kit that Uses 1/4 inch Main Feed Line
Question:
So the last issue is the flex hoses going to the calipers. I will need hoses with a 90 bend at the caliper end. Again, your kit shows them as straight. Part #'s would be great. Prob about 18", with stainless fittings. Thank you for your patience.
asked by: Keith D
Helpful Expert Reply:
Having the slightly larger main feed line of 1/4 inch is a a great idea for plumbing up your triple axle trailer. We have the HydraStar kit part # HS496-153 which is designed for that. This kit uses 1/4 for the main feed line to the first tee fitting and then from there reduces to the smaller 3/16 inch size but this kit was designed for heavier trailers like yours so it will still work really well and you won't have any issues with brake performance. I attached a diagram that shows how it installs as well.
Products Referenced in This Question
Hydrastar Hydraulic Brake Line Kit - Triple Axle - 15' Long, 3/16" Main Line
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 15 Feet Long
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Triple Axle
- Hydrastar
more information >
Dexter Hydraulic Brake Line with Fittings - 17-3/4" Long
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 17-3/4 Inch Long
- Brake Lines
- Flexible Brake Hose
- Brake Line Components
- Dexter
more information >
Product Page this Question was Asked From
Hydrastar Hydraulic Brake Line Kit - Tandem Axle - 25' Long, 3/16" Main Line
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 25 Feet Long
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Tandem Axle
- Hydrastar
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Hydrastar Hydraulic Brake Line Kit - Triple Axle - 15' Long, 3/16" Main Line
- Shop: Hydrastar Hydraulic Brake Line Kit - Triple Axle - 25' Long, 3/16" Main Line
- Shop: Gen-Y Viking Gooseneck Coupler - 2-5/16" Ball - 30K GTW - 8.5K TW
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 12" - Left and Right Hand Assemblies - 5.2K to 7K
- Shop: Kodiak Hydraulic Brake Line Kit - Triple Axle - 20'
- Shop: Hydrastar Electric Over Hydraulic Actuator for Drum Brakes - 32 oz Capacity - 1,200 psi
- Search Results: trailer lights
- Shop: Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens
- Search Results: brake line
- Article: Trailer Lighting Requirements
- Q&A: Recommendation for Routing Triple Axle Brake Line Kit
- Search Results: spindle wear sleeve
- Search Results: fitting
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Hydrastar Hydraulic Brake Line Kit Review
- Search Results: deemax caliper
- Search Results: hydraulic flex hose
- Search Results: flexible hydraulic brake lines
- Video: Titan Hydraulic Brake Lines and Fittings Review
- Video: Dexter Hydraulic Brake Line with Fittings Review
- Video: Feature Breakdown: Wet Equalizer Bolt with Castle Nut and Grease Zerk
- Q&A: 7k Trailer Hub with 8 Lug Pattern with 9/16 inch Wheel Studs
- Q&A: Difference Between Dexter 8 on 6-1/2 inch Trailer Hubs # 8-231-9UC1-EZ and # 42865-KIT
- Q&A: Installing Hydraulic Disc Brakes on a 5th Wheel Trailer
- Q&A: Hub & Drum Assembly 8 lug for a 2007 Kaufman 3 Car Trailer
- Q&A: Electric Over Hydualic Disc Brake Setup for 2020 Grand Design Momentum 376THS
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Video: Let’s Check Out the Dexter Disc Brake Assembly
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-231-9UC1-EZ Review
- Video: All You Need to Know About the Kodiak Disc Brakes
Keith D.
9/18/2019
So the last issue is the flex hoses going to the calipers. I will need hoses with a 90 bend at the caliper end. Again, your kit shows them as straight. Part #'s would be great. Prob about 18", with stainless fittings. Thank you for your patience.