Power Cord Recommendation for Connecting 1976 North Star Camper To Shore Power

Question

Question:

1976 north star camper trailer. I need to get electric from trailer to pole at state park.

asked by: Debbie L

0

Expert Reply:

The three most likely outlets you'll encounter at the campground power pedestal placed at each campsite is a 20 amp a 30 amp or a 50 amp with 30 and 50 amp being the most common. The most common inlet on a camper would be either a 30 or a 50 amp, depending on the size of the camper.

I've tried doing research on your camper, and have mostly come up empty handed. Most campers will have a 30 amp inlet that uses a twist lock socket. If you need a 3 prong, use # A10-G30253E or # A10-G30254E for a 4 prong. If you have a different connector on your camper, please let me know.

expert reply by: Mike L

0

Answer 1

Hey Bob, The B&W Digital Tongue Weight Scale #BW34KR still isn't out yet so we don't currently have that information. I reached out to B&W and they stated they don't have any info to release yet but that it should be on the market…

view full answer...

Answer 2

For your 2019 Ram 1500 the Curt TriFlex NEXT Trailer Brake Controller item #C24VV can be installed with a plug and play adapter using the Curt Custom Wiring Adapter item #C51458. The port you need is right above where your right foot would be covered…

view full answer...

Answer 3

Hey Paul, You'll actually need a different 15 amp adapter for the SmartPlug RV Power Cord - 30 Amp #SM59FR. For your 15 amp residential plug you'll just add the Mighty Cord RV Power Cord Adapter Plug - 30 Amp Female to 15 Amp Male…

view full answer...

Answer 4

The SmartPlug RV Power Cord #SM59FR weighs 9-lbs. This cord is rated for 125v or 30Amps, and is 30' long. I have attached a review video for you too check out as well.

view full answer...

Answer 5

The SmartPlug RV Power Inlet #SM97FR would be wired to the trailer and would be paired with a SmartPlug power cord, like part #SM59FR, that has a matching connection for the inlet and a standard 30 amp connector on the other end to connect to the…

view full answer...

Answer 6

Yes, we do have a cap for the female end of the 30A SmartPlug RV Power Cord #SM59FR. What you're looking for is the Weathercap #SM43FR.

view full answer...

Answer 7

The power draw of the MaxxFan part #MA00-07500K that you referenced is 5 amps or 60 watts.

view full answer...

Answer 8

The Furrion Replacement RV Power Inlet #431861 was designed to be wired into a 30 amp RV and attach to a 30 amp female twist lock plug so yes you will be able to remove your current 30 amp pull cord and install this power inlet in its place. You…

view full answer...

Answer 9

The Epicord 30 Amp Twist Lock Power Inlet - White #277-000137 is a great way to have a clean connection from your RV to your shore power or generator. This power inlet will work with any 30 amp 3 prong twist lock female connector. I've linked…

view full answer...

Power Cord Recommendation for Connecting 1976 North Star Camper To Shore Power

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching