Inner Dimension of the U-bolt for the Fulton Economy Spare Tire Carrier

Question

Question:

What is the inside dimension of the closed end of the large U-bolt? I want to check where it will fit on my trailer.

asked by: Don

0

Expert Reply:

The internal dimension of the closed end of the large u-bolt for the Fulton Economy Spare Tire Carrier, # FETCHL0700, is 3 inches. You will want to mount the spare tire where the u-bolt will have the most contact with the trailer for a secure mount.

Check out the pictures I attached showing the measurement I took and to give you an idea on how it would install on your trailer.

expert reply by: John H

0

click to enlarge

Answer 1

Although there is no direct replacement available for the Atwood GC10A-4E Water Heater. I recommend replacing with a tankless system, the Furrion RV Tankless Water Heater, #FR68SR. It has been verified that the cutout dimensions will not need to be…

view full answer...

Answer 2

For your 5th Wheel Cedar Creek Trailer, I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide #13703. This hitch can be welded or bolted onto your trailer frame and will work on box frame, c-channel, or I-beam…

view full answer...

Answer 3

The Solera Replacement Awning Fabrics like the the 21' Long White Fade part #LCV000334445 are confirmed fits for Dometic A&E Awnings.

view full answer...

Answer 4

The best replacement option we offer for a Atwood GC10A-4E Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Inner Dimension of the U-bolt for the Fulton Economy Spare Tire Carrier

Product Page this Question was Asked From

Continue Researching