Replacement 12-3/4 Inch Rotor for Dexter 7,000 Lb Axle

Updated 08/06/2019 | Published 08/04/2019

Question:

The specs say it’s a 12 1/4 diameter rotor but mine measures 12 3/4. Everything else matches up. The numbers inside my hub says 8-416 also has WF2 and 1.03 min thick.

asked by: Dallas W

Expert Reply:

The Dexter 12-1/4" Hub-and-Rotor Assembly part # 008-416-92 is technically classified as having a 12-1/4" diameter but the actual diameter is around 12-3/4". The 8-416 stamp you have on the rear of your existing hub/rotor also confirms that you have what is technically classified as a 12-1/4" diameter. Therefore, so long as the stud size (9/16") and lubrication type (grease) are correct then above will work for you.

expert reply by: Conner L