Options to Raise Height of 2007 Wells Cargo Model TW101 Trailer

Published 07/22/2019

Products Featured in This Question

Dexter Trailer Springs Over-Under Conversion Kit

(823)

$87.71

Torflex Lift Kit - Single Axle - 2-5/8" Lift

(803)

$155.78

Torflex Lift Kit - Single Axle - 2-5/8" Lift

(803)

$126.16

Question:

Thank you Jon, I dont think I mentioned you that my trailer does have leaf springs. I will try to send you pictures of the bottom of my trailer. Thank you

asked by: Rosita G

Helpful Expert Reply:

According to the photo you sent in your 2007 Wells Cargo Model TW101 trailer has a 3,500 lb axle which means it has a 2-3/8" diameter.

If you aren't able to use an over-under conversion kit like the part # K71-384-00 then the only other way for you to raise the height of your trailer is to use taller spring hangers. I'm not sure what size hangers you currently have but I have attached a link to our selection of hangers that you can filter through. Please note that you will need to have your current hangers cut off and new ones welded on.

expert reply by: Jon G

click to enlarge

Rosita G.

7/22/2019

Thank you Jon, I dont think I mentioned you that my trailer does have leaf springs. I will try to send you pictures of the bottom of my trailer. Thank you

Jon G.

7/22/2019

Thank you for the pictures and the extra information! From that I can tell that you have a Torflex axle. This means that you need either part # K71-723-01 for a #9 Torflex or part # K71-707-01 for a #10 Torflex axle (please note that a lift kit cannot be used with Torflex axles with 3" high profile brackets). You should be able to find a tag somewhere on the axle that tells you which # Torflex axle you have.