Can Tekonsha Voyager XP be Used with Electric Over Hydraulic Trailer Brake Actuators

Published 06/24/2019

Products Featured in This Question

Tekonsha Voyager Trailer Brake Controller - 1 to 4 Axles - Proportional

(751)

$78.74

Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional

(6614)

$179.85

Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional

(2749)

$146.01

Question:

Please tell me Prodigy P2 (with the EOH option selected) will also work (as well as the Prodigy P3). Good fast answer...THANKS!

asked by: Tom B

Expert Reply:

Not every brake controller is capable of working with electric over hydraulic brakes as the electric actuators are quite a bit different from trailer brake magnets. The Voyager part # 39510 that you referenced unfortunately is not one that is compatible which is why you are having the issue you are having. You'll have to swap to a new controller that is like the Prodigy P3 part # 90195 which is overall a better controller and will use the same connector as what your Voyager has so it will be an easy swap.

The P3 has a more advanced inertia sensor than the Voyager and has a full screen display too that uses complete words instead of codes that have to be deciphered. I attached a review video for more info as well.

expert reply by: Jameson C

Tom B.

6/24/2019

Please tell me Prodigy P2 (with the EOH option selected) will also work (as well as the Prodigy P3). Good fast answer...THANKS!

Jameson C.

6/24/2019

Yep! The P2 part # 90885 is just as compatible as the P3 part # 90195. They both internally are the same controller with only differences being on the display.