bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Boat Covers


  • What Boat Cover Fits My 16-Foot 1988 Campion 165 Fishing Machine with 70-Inch Beam Width?
  • Yes! For a great cover for your 1988 Campion 165 Fishing Machine, I recommend the Classic Accessories DryGuard Waterproof Boat Cover - 14' to 16' Long # CA20083. Not only is this cover completely waterproof, it comes with 2 rear air vents to prevent lofting and billowing during transport. Another bonus is that it comes with a 5-year warranty. This cover is designed to fit your 16-foot boat with a beam with of 70 inches wide.
    view full answer...

  • Do you have a Cover to Use for my Empty Trailer?
  • Most Malibus are in the 20'-25' length range so the trailer will be slightly longer than that. To best match this the Adco SFS AquaShed Cover for Hi-Lo Travel Trailer part # 290-12253 this will work up to 26'. Of course without a boat on the trailer there will be extra cover you will need to tuck away. There are not trailer specific covers available but if you feel this one is too long please give me a measurement from the back of the trailer to the end of the tongue. This will allow...
    view full answer...

  • How Much Does the Taylor Made Eclipse Pontoon Boat Cover Weigh
  • The Taylor Made Eclipse Pontoon Boat Cover - 22' to 24' Long Boats - 102" Beam # 36970912 weighs 22 lbs. One person can put this cover on but if you can get an extra set of hands to help it will be a much easier process.
    view full answer...

  • Trailerable Boat Cover for 22 Foot Suntracker Party Barge
  • I do have a solution for you but the cover you referenced Taylor Made Eclipse Pontoon Boat Cover item # 36970912 is not for trailering. I recommend the Classic Accessories StormPro Pontoon Boat Cover item # CA20028, this cover is rated for both storing and hauling your 2015 Suntracker Party Barge 22foot DLX. The cover fits boats from 21' - 24' long and 96" wide at the widest point of boat.
    view full answer...

  • Does Taylor Made Eclipse Pontoon Boat Cover # 36970912 Include Support Pole
  • Yes the Taylor Made Eclipse Pontoon Boat Cover # 36970912 that you referenced does include an adjustable support pole that will prevent water from pooling. If you wanted more than just the single included pole we have the part # 36911991 which is an additional one.
    view full answer...

  • Will Taylor Made Eclipse Center Console Boat Cover # 36970911 Fit 1997 Proline Boat w Center Console
  • Yes, the Taylor Made Eclipse Center Console Boat Cover # 36970911 would fit your 1997 Proline that is 18 feet long and has a center console.
    view full answer...

  • Cover Options for an 18 Foot V-Hull Lund Boat
  • We have lots of covers that could fit your 18 foot Lund. Do you know the specific model Lund boat you have because that would help determine the right line of covers to look at. Cover # CA20086 for example fits V-Hull boats 17 to 19 feet long and with up to a 102 inch beam. We also have # 052963889383 for 16 to 18-1/2 foot V-Hull boats with up to a 98 inch beam. A snug fit will help prevent excess cover from coming loose but if the beam is wider than what the cover will fit then you...
    view full answer...

  • Recommended Cover for Maurell Crest 22’ Pontoon Boat
  • The Taylor Made Eclipse Pontoon Boat Cover part # 36970912 is what I recommend for a Crest 22’ Pontoon Boat. This cover will be easy to take on and off as it have quick-release buckles and heavy duty seams which will hold up with frequent install and removal. These covers aren't necessarily designed to be taken on and off frequently so having something durable to hold up to this extra stress is needed.
    view full answer...

  • Size Selection of Sterns Storm Pro Boat Cover Part # 052963889383
  • A snug fit is desirable, even if the cover will just be used for storage and not trailer travel. The beam width of the 16-18.5 Cover is 98 inches, and the beam width of the 17-19 cover is 102 inches. Both are significantly wider than your boat, so I would go with the 16-18.5 Cover as it would provide a more snug fit.
    view full answer...

  • Pontoon Boat Cover for a 22 ft Ponton Boat
  • The Classic Accessories # CA20028 cover is a universal fit on pontoons that are 21 to 24 feet long and have a beam width of up to 96 inches. You will need to measure the width of your pontoon at the widest point the cover will be required to cover and as long as the measurement is 96 inches or less this cover should work for you. This cover is appropriate for trailering or for storage.
    view full answer...

  • Boat Cover Recommendation for a 17 ft Bristol Skiff
  • The center console of your Briston Skiff is pretty low so it would not interfere at all with the Classic Accessories DryGuard Waterproof Boat Cover # CA20086 installing. Based on the other dimensions that you listed this cover would fit and work well.
    view full answer...

  • Boat Cover Recommendation for a Crestliner Tri Hull 17 Feet Long
  • Since your hull is 17 feet in length you would want the part # CA20086 as it is designed for boats that are 17-19 feet in length and the part # CA20084 is designed for boats 14 to 16 feet in length.
    view full answer...

  • Bennington R23 Pontoon Boat Trailer Cover
  • If your Bennington R23 pontoon boat up to 24 foot in length and a 102" beam, you can use the Taylor Made # 36970912 boat cover featuring 4 ply breathable fabric with vents and a reflective shell. Includes 10 one inch tie downs. 5 year limited warranty. If you need a different size, just email me back with your measurements.
    view full answer...

  • Can the Cover for a 20 Foot Long Pontoon Boat Be Used While the Boat Is Moored
  • I do have an option for you but all of our boat trailer covers are designed to be used with a boat on a trailer or in storage. That said, if you are able to find a way to secure the straps for the cover to the boat while in the water then I do not see any other reason as to why they would not work in this application as well. In order to make sure we get you the correct cover I would need to know the widest point of your pontoon boat. If it does not exceed 96" then you can use the Classic...
    view full answer...

  • Is the Classic Accessories Boat Cover Waterproof
  • The color of the fabric on the part # 052963889482 is gray like what the product picture indicates. The cover would not vent or be breathable as it is designed to be waterproof. The support pole is basically just a pole that gets used to lift the cover up so that it can prevent pooling of water.
    view full answer...

  • Boat Cover Recommendation for 2007 Bayliner 245 Cruiser
  • If your 2007 Bayliner 245 cruiser is on the lower end of the length range for cover # 052963889680 then the additional slack in the cover will help it fit over the bow and side rails. This cover fits boats that are 22' to 24' (beam width 116"). This is the largest size we offer at this time.
    view full answer...

  • Comparing Classic Accessories Boat Covers for 2015 Crestliner Raptor
  • Either the Classic Accessories Boat Cover by StormPro - 16' to 18.5' (beam width 98") # 052963889383 or the Classic Accessories DryGuard Waterproof Boat Cover - 16' to 18-1/2' - Up to 98" Beam # CA20085 will work for your 2015 Crestliner Raptor. The differences between the covers is the Storm Pro # 052963889383 comes with the support pole to keep water from pooling and yet doesn't have taped seams, so water can find its way in at the needle holes. The Dry Guard # CA20085 does not come...
    view full answer...

  • Boat Cover Recommendation for 2002 Four Winns 180 Horizon that is Waterproof
  • It really depends on what kind of cover you are mentioning. If the cover is one like the part # 052963889482 that covers everything you would not want to use it at the same time as this cover. If its a smaller cover that maybe only covers a couple sections of the boat then you could use it at the same time. This cover is considered water resistant but is not waterproof. If that feature is important to you the DryGuard # CA20085 will be the better choice as it is totally waterproof but...
    view full answer...

  • Recommended Cover for 1966 Boston Whaler Montauk
  • If your Boston Whaler Montauk is 17 feet long the Classic Accessories Boat Cover # 052963889383 is a great option as it's designed for boats like yours that are between 16 and 18-1/2 feet in length. This will work perfectly to cover the bow and side rails on the Montauk but it's not going to cover the outboard motor. This will be the case with any of our boat covers. This cover features integrated quick release buckles and an adjustable strap system that will allow for an easy and secure...
    view full answer...

  • Boat Cover Recommendation for a 17 Boston Whaler Montauk
  • For a 17 foot boat like your Boston Whaler Montauk that most likely has bow rails the Classic Accessories Boat Cover # 052963889383 would be an excellent option since it can fit boats from 16 to 18-1/2 feet in length.
    view full answer...

  • Would the Classic Accessories Boat Cover # 052963889482 Work with an I/O Motor
  • The Classic Accessories Boat Cover # 052963889482 should have no problem being used with an inboard/outboard motor as long as the dimensions of the boat are compatible with the cover. This cover is designed for V-hull runabouts that are between 17-19 feet in length and a beam width of up to 102 inches. I attached installation instructions for you to check out also.
    view full answer...

  • Difference Between Classic Accessories Boat Covers 052963889383 and CA20085
  • The main difference between the two covers that you mentioned is the application for the two. The Classic Accessories DryGuard Waterproof Boat Cover # CA20085 is designed for bass and fishing boats whereas the Classic Accessories Boat Cover # 052963889383 is for a V-Hull boat. Depending on which style of boat you have would dictate which cover would be best.
    view full answer...

  • Which Classic Accessories Boat Cover Will Fit 1974 Tahiti 18 Foot Boat With Outboard Motor
  • I contacted our representative at Classic Accessories and he recommend a Model C Cover, which fits boats 16 feet to 18-1/2 feet long.
    view full answer...

  • Recommended Cover for 16-1/2 Foot Boat with Trolling Motor
  • The Classic Accessories Boat Cover # 052963889284 referenced in your question is designed to fit boats that are between 14 and 16 feet long. Since your boat measures a bit longer than 16 feet, I recommend going up in length with the Classic Accessories # 052963889383. This is the same style cover as what you were looking at but it fits boats that are between 16 and 18-1/2 feet long. This will likely provide a better fit for your boat and can also work with wider boats with a beam width...
    view full answer...

  • Will Classic Accessories Boat Cover 052963889482 for 17 to 19 foot boats fit a 2004 Hurricane 187
  • I just spoke with my contact at the manufacturer and he said that this Classic Accessories cover, part # 052963889482 will indeed fit your 2004 Hurricane 187. For an outboard motor cover I attached a page that shows all of the different covers we offer. You will need to know the size and horsepower rating of the motor to select the right cover.
    view full answer...

  • Recommended Cover for 1993 Boston Whaler Montauk 17
  • Based on my research your 1993 Boston Whaler Montauk has a total length of 17 feet and a beam width of 74 inches. I do recommend verifying this in case you have a slightly different model. For a boat of this size the Classic Accessories Boat Cover # 052963889383 should work nicely. This cover fits boats that are 16 to 18-1/2 feet long and have a beam width of up to 98 inches. It is constructed of high strength polyester 600D Marine Canvas and it will do a great job of protecting the...
    view full answer...

  • Will the Taylor Made BoatGuard Eclipse V-Hull Bay Boat Cover Fit a 22' Boat with a 96" Beam
  • Yes, the Taylor Made BoatGuard Eclipse V-Hull Bay Boat Cover # 36970914 will fit your 22' V-Hull boat with 96" beam. This cover will fit boats between 20' - 22' and beams up to 102" (maximum width), so it will still work for your 96" beam. It is designed to be trailable and has elastic cords to help keep the cover tight.
    view full answer...

  • Boat Cover Recommendation for a 1987 Stratos 179V Bass Boat
  • The covers like the Classic Accessories Hurricane Fishing Boat Cover # 052963889383 will work on bass boats like yours, but you will need to consider your trolling motor when you install the cover. You would either want to remove the trolling motor before you install the cover or come up with a way to protect the cover from the blades of it. Some people will use an old deflated basketball to place over the blades of the motor before you install the cover. From the research I did it...
    view full answer...

  • Boat Cover Recommendation for a Duffy Classic 16
  • I looked up some specs on your Duffy Classic 16 and found that it measures 16 feet 5 inches in length and has a beam of 7 feet 4 inches. With the top off of your boat the Classic Accessories part # 052963889383 would work well since it is sized for your boat. This cover is made of high strength polyester StormPro 600D Marine Canvas, and is designed for durability, weather resistance, mildew resistance, and protection against U.V. damage. The canvas is also treated for maximum water resistance...
    view full answer...

  • Boat Cover Recommendation for Crestliner SportFish 1850
  • Since the cover gets tightened with straps going with a slightly larger cover would be the way to go as it would make the install a bit easier and could be tensioned to fit the boat just fine. Looks like the # CA20086 would be the way to go.
    view full answer...

  • Can a Pontoon Boat Cover be Used when Transporting a Boat
  • The Classic Accessories StormPro Pontoon Boat Cover, # CA20027, can be used when transporting your boat, but how it holds up depends on a lot of factors. Things like speed, road and weather conditions all will play a part in how the cover responds to travel. The downfall of a lot of covers is if they are not installed and secured properly and according to the instructions, linked for reference, parts can come loose, flap in the wind and end up tearing even the most well-constructed cover. Personally,...
    view full answer...

  • Boat Cover for a 1987 Boston Whaler Montauk with Bow and Side Rails
  • If your 1987 Boston Whaler Montauk is on the lower end of the length range for cover # 052963889383 then the additional slack in the cover will help it fit over the bow and side rails. This cover fits boats that are 16 to 18-1/2 feet long with a beam width up to 98 inches. If your boat is at or near the 18-1/2 foot max length then it could be a tight fit or you would have to go up a size, # 052963889482, which is for 17 to 19 foot long V-hull boats with a 102 inch beam width.
    view full answer...

  • Will Classic Accessories Boat Cover Fit on Boat Without a Windshield?
  • The Classic Accessories Boat Cover by StormPro # 052963889185 fits 14 -16 foot boats with a beam width up to 75 inches. Since your boat meets those dimensions, the fact that it does not have a windshield is not going to affect how the cover fits. It features an integrated buckle and adjustable strap system as well as an adjustable elastic cord at the bottom of the cover to ensure a tight fit over your boat.
    view full answer...

  • Would Classic Accessories Boat Cover # 052963889185 Fit Boat with 68 inch Beam
  • For your boat with a 68 inch beam the part Classic Accessories Boat Cover # 052963889185 is going to fit as it can fit beams that are near 75 inches. You will most likely have to remove the trolling motor though. Since they are designed for easy removal that shouldn't be too big of a problem.
    view full answer...

  • Cover Recommendation for a Yamaha 1997 Waveventure 1100
  • It looks like your 1997 Yamaha Waveventure 1100 is right at 124 inches. The Classic Accessories Deluxe Personal Watercraft Cover # CA20209 that you referenced should work well for you since this cover is designed for PWC's that are up to 140 inches.
    view full answer...

  • Will the Eclipse Boat Cover # 36970911 Fit My 16-Foot 98 Champion 165 Fishing Boat?
  • Yes. You can definitely use the Taylor Made Eclipse Center Console Boat Cover - 17' to 19' Long Boats - 96" Beam # 36970911 on your 16-foot 98 Champion 165 with a center console instead of the # 36970211. However, you may have a bit of extra overhang that can be easily adjusted for a tight fit. The main difference between the covers is that the # 36970911 is a vented design while the # 36970211 does not include vents that prevent billowing. The # 36970911 also comes with 600-Denier reflective...
    view full answer...

  • What is Classic Accessories' DryGuard Fabric and Will DryGuard Cover CA20085 Fit 17-Foot Bayliner
  • The 17-foot, 9-inch length of your 2007 Bayliner will be fine with the Classic Accessories DryGuard Waterproof Boat Cover # CA20085 so you'll just want to measure the boat's beam (width at the widest point) to confirm it does not exceed the 98-inch maximum for the cover. It will fit fine with your windshield. If you find you need a slightly larger cover you can use DryGuard cover # CA20086 which fits boats up to 19-feet long and up to a 102-inch beam. The DryGuard material is a 300-denier...
    view full answer...

  • Recommended Boat Cover for a 18' x 98" V-Hull Boat
  • As long as your boat's beam (width of the widest point) does not exceed the 98 inches, the Classic Accessories DryGuard Boat Cover for 98" Beam # CA20085, it will fit your boat. I would not recommend choosing the larger size as boat covers are meant to fit snug to act as a seal to protect your boat. However, if your boat beam is a little larger than 98" I would recommend the Classic Accessories DryGuard Waterproof Boat Cover for a 102" Beam # CA20086. This cover will provide the best...
    view full answer...

  • Personal Watercraft Cover For a Yamaha VX110 Wave Runner
  • Yes, the cover you selected ( # CA20209) will fit the 2006 Yamaha VX110 Wave Runner. Your PWC is 127.7 inches long and the Stellex cover is designed for PWC's up to 140 inches long. Have fun on the water and be safe!
    view full answer...

  • Installation Instructions for Classic Accessories StormPro Pontoon Boat Cover # CA20027
  • Thanks again for shopping with etrailer! I'm very glad to hear that you are pleased with your purchase. I have attached a snapshot of the instructions for the Classic Accessories StormPro Pontoon Boat Cover, # CA20027.
    view full answer...

  • Will the Stellex Personal Watercraft Cover - Large Fit My 2008 Seadoo RXTX and My 2001 Seadoo GTX
  • I checked the specifications on your watercraft and found that the 2008 Seadoo RXTX and the 2001 Seadoo GTX are 130 inches long and that the width is 48 inches. The Height on these watercraft is 46-1/2 inches and 47-1/4 inches respectively so the difference is not a concern. The Stellex Personal Watercraft Cover, part number CA20209, would be the correct fit for both of your Seadoo craft, and is sized for all PWC up to 140 inches long.
    view full answer...

  • What Color is StormPro Boat Cover 052963889383?
  • The boat cover is grey and fits boats up to 18.5 feet long and 98 inches wide. This cover fits fish and ski boats as well as pro-style bass boats within those dimensions.
    view full answer...

  • Recommended Boat Cover For 16 Foot Lund Rebel SS Boat and 40 HP Outboard Motor
  • You will need to determine the beam width of your 16 foot Lund Rebel SS Boat, for the proper fit of a cover. A boat cover I would recommend that is good for outdoor storage is the Classic Accessories Boat Cover by StormPro, part # 052963889284. This cover fits 14 foot to 16 foot long boats that have a beam width of up to 90 inches. The StormPro covers will repel water, but are not waterproof. You will want to measure your beam width to determine if this cover will work. If your beam...
    view full answer...

  • Boat Cover Recommendation for Boston Whaler Mauntuk 17
  • For a 17 foot boat like your Boston Whaler Montauk that has bow rails the Classic Accessories Boat Cover # 052963889383 would be an excellent option since it can fit boats from 16 to 18-1/2 feet in length.
    view full answer...

  • Will Boat Cover Prevent Mildew On Interior Of Boat In Storage
  • The Classic Accessories DryGuard Waterproof Boat Cover, part # CA20083, is designed to keep the interior of your boat dry and clean. The PVC-free fabric resists mildew, and is resistant to UV rays. This cover has two rear-air vents that have built-in stiffeners and allows moisture on the interior to escape. Although there is no guarantee to eliminate mildew completely, the vents will help reduce the chance for condensation build-up and mildew. I would recommend removing the cover occasionally...
    view full answer...

  • Will Classic Accessories 17 to 19 Foot Long V-Hull Boat Cover Fit a 2002 Monark King 190
  • Like you said, the Classic Accessories cover # CA20086 fits 17 to 19 foot long V-hull boats. It also fits beams up to 102 inches wide. It does not seem like width would be an issue. Provided the cover supports you have do not reach up higher than the wind screen, if applicable, then I do not foresee there being a problem. You could step up to the next highest size, # CA20087, which fits 20 to 22 inch long V-hull boats and beams up to 106 inches. But if it is too large it would not fit...
    view full answer...

  • Classic Accessories Boat Cover Fit Information for a 2002 Fourwinns Horizon 180 Boat
  • To determine if this Classic Accessories Boat Cover # 052963889482 will fit on your 2002 Fourwinns Horizon 180 you will need to take some measurements of your boat. This cover is designed to fit boats that are 17 to 19 feet in length and boats with beam widths up to 102 inches. If you measure the length and width of your boat and it fits in those measurements this cover should work for you. If not, email me back with the measurements of your boat and I can hopefully find one that does fit.
    view full answer...

  • Cover for a 175 Inch Long Bass Boat with an 85 Inch Beam
  • A boat that is 175 inches long would be about 14-1/2 feet so you would want a cover designed for 14 to 16 foot boats. We have some covers in this size. The top of the line and what I recommend is # CA20084. It will provide the best coverage and protection of the available options.
    view full answer...

  • Availability of Cover for 16 Foot Lund DLX Boat
  • You can measure the exact beam width of your 16 foot Lund DLX Boat to determine the proper fit of a cover. For example, the Lund 1648T jon boat is 15-feet 10-inches long and has a beam width of 70-inches. The boat cover I recommend is the Classic Accessories Boat Cover by StormPro, part # 052963889284. This cover fits 14 foot to 16 foot long boats that have a beam width of up to 90 inches. If your beam width is more than 90 inches, you will need part # 052963889383.
    view full answer...

  • Recommended Boat Cover for 16 ft Tri-Hull Crestliner
  • The Classic Accessories DryGuard Waterproof Boat Cover, part # CA20084 would be a good choice for you. The cover fits boats up to 16 feet long and a beam width up to 90 inches.
    view full answer...

  • How To Choose Correct Size Boat Cover
  • Thank you for the photos of your 15 Foot Boston Whaler boat. To ensure proper fit of a cover, I would need to know the length and beam width of your boat. Measure the boat's flat width at it's widest point usually near mid-ship. If you can let me know this number I can recommend a boat cover that fits your boat.
    view full answer...

  • Classic Accessories Boat Cover Recommendation for 1973 Silverline Comoro
  • I looked up your boat and the 1973 Silverline Comoro could have been 15 feet or up to 19 feet in length. So depending on what model you have the part # 052963889284 could work but it would have to be 15 or 16 feet in length. For the version of this cover for 17 to 19 feet you'd need the part # 052963889482.
    view full answer...

  • Does Classic Accessories Boat Cover Fit Over Boat Motor
  • The Classic Accessories Boat Cover, part # 052963889383 is designed to fit tight around the boat but does not fit around the motor. There are so many motors available it would be tough to make a cover that would fit over the motor and provide a tight fit. We do not offer boat motor covers.
    view full answer...

  • Cover Recommendation for Boston Whaler Montauk
  • For a 17 foot boat like your Boston Whaler Montauk that most likely has bow rails the Classic Accessories Boat Cover # 052963889383 would be an excellent option since it can fit boats from 16 to 18-1/2 feet in length. This would not cover the outboard motor though.
    view full answer...

  • Cover Recommendations for a Campion Allante 505 with Outboard Motor
  • It looks like the Campion Allante 505 is approximately 16 feet, 7 inches long so you would want to look at covers for 16 to 18-1/2 foot boats such as # 052963889383 or # CA20085. If your boat is a different length (not counting the outboard motor) let me know.
    view full answer...

  • StormPro Boat Cover Recommendation for a 1983 Bayliner
  • I looked up the length of your 1983 Bayliner with a 1950 Bow Rider and it is 18 feet 8 inches long. You would want to go with the 17-19 foot long boat cover by Classic Accessories part # 052963889482 because of that.
    view full answer...

  • Will the Classic Accessories Stellex Personal Watercraft Cover Fit a 2006 Sea Doo GTX 4
  • According to my contact at Classic Accessories their Stellex Personal Water Craft Cover # CA20209, will fit personal water crafts with a total length (including any after market accessories) up to 140 inches. From my research I found that the typical length of your 2006 Sea Doo GTX 4 is approximately 131 inches. I would recommend measuring your Sea Doo, including any additional accessories that you might have. If your Sea Doo is less than 140 inches then yes the Classic Accessories...
    view full answer...

  • Material Used for Classic Accessories CA20087 DryGuard Boat Cover
  • According to my Classic Accessories representative, their # CA20087 boat cover is constructed of 100% woven polyester with a 300 x 300 denier rating. The fabric is waterproof and resists mildew and UV rays, and is protected by a 5 year warranty.
    view full answer...

  • Will Classic Accessories Boat Cover 052963889185 Fit a 15 Foot Sylvan Alaskan
  • Yes, the Classic Accessories boat cover # 052963889185 will work with your 15 foot Sylvan Alaskan as you have described it. The cover is designed for 14 to 16 foot long V-hull boats with a beam up to 75 inches. Your boat is right in the middle of all those specs so you should have a great fit!
    view full answer...

  • Economically Priced Boat Cover Recommendation for 14 Foot Boat
  • For a great priced boat cover for a 14 foot boat the part # 052963889185 would be a great option. It's designed to fit 14-16 feet boats like yours and would work well.
    view full answer...

  • Will Classic Accessories PWC Cover # CA20209 Fit a 2006 Yamaha Waverunner VX110 Deluxe w/Mirrors
  • It doesn't look like the mirrors will be a problem on your 2006 Yamaha Waverunner VX110 Deluxe so you would have to go by the dimensions of the cover. Classic Accessories cover # CA20209 was designed to fit PWCs that are up to 140 inches long. It looks like your Waverunner has a length of 127.7 inches so the extra length the cover provides would definitely have enough slack to account for the side mirrors.
    view full answer...

  • Will Classic Accessories StormPro Boat Cover # 052963889383 Fit 18-1/2-Foot Lund Boat
  • I checked the beam width of a number of 18-foot Lund boats and they fall into the range of 88- to 98-inches. Since the Classic Accessories StormPro Boat Cover # 052963889383 fits boat lengths to 18-1/2-feet and beam widths to 98-inches it will work fine on the Lund boat. Since this craft is at the top of the covers size range, and since the cover has an elastic cord in the bottom hem, the fit should be snug and wrinkle-free.
    view full answer...

  • Will Classic Accessories Boat Cover 052963889581 Fit 1997 Crownline 210 CCR 21 foot Boat
  • As long as your Crown Live is not wider than 106 inches the Classic Accessories Boat Cover by StormPro # 052963889581 is an excellent option as it has a boat length range of 20-22 feet.
    view full answer...

  • Boat Cover Recommendation for 2018 Blazer Bay 2200 with Center Console
  • For your 2018 Blazer Bay 2200 the part # CA20087 would fit and work well as this is designed for boats up to 22 feet in length and 106 beam width. Your beam is 96 inches so it would work well. I looked up pictures of the console your boat has and it's not tall enough to be an issue with this cover either.
    view full answer...

  • Recommendation of V-Hull Runabout Boat Cover for a 1996 - 1999 17-19 Foot Boston Whaler Outrage II
  • Currently we offer 2 boat covers that will work based on specifications of your 1996-1999 17-foot Boston Whaler Outrage II. From my research it looks like your boat is roughly 204-211-inches long and the beam is 84-inches. Which equals 17 to 17-1/2 feet long and 7 foot beam. These boat covers will fit a 17-19 foot boat and up to 102-inch beam: The StormPro # 052963889482 and DryGuard # CA20086. They both have quick release buckles and adjustable straps to provide easy fitting and trailering...
    view full answer...

  • Boat Cover for a 14 Foot Long and 96 Inch Wide Boat with Cuddy Cabin and 15 Inch Bow Rails
  • Your boat at 19 feet and 96 inch beam length is within the tolerances of the Classic Accessories Boat Cover, # 052963889581. As far as width, it fits up to 106 inch wide boats. the extra foot of length should not be a hindrance either. A similar cover that fits 17 to 19 foot boats and beam widths up to 102 inches is # 052963889482. This would be a tighter fit to your boat. I think the bow rails and the cuddy cabin would necessitate the larger cover though.
    view full answer...

  • Boat Cover Recommendation for a 2009 Hurricane 202
  • We have spoken with our contacts at Classic Accessories about fitting their covers to deckboats like your 2009 Hurricane 202 OB deck boat and they have stated that they will fit. So for yours that is right at 20 feet you would want the part # 052963889581. A breathable fabric wouldn't be waterproof so this would not be considered breathable but it is mildew resistant. That is why we don't offer a breathable solution.
    view full answer...

  • Does The Classic Accessories Boat Cover by StormPro # 052963889383 Have Vent Holes
  • The Classic Accessories Boat Cover by StormPro # 052963889383 has dual rear air vents that reduce inside moisture and ballooning of the cover at high speeds. This boat cover is designed for weather resistance, mildew resistance, and protection against U.V. damage.
    view full answer...

  • Does Classic Accessories Cover 052963889482 Fit a 2002 Four Winss 180 Horizon
  • The pictures of your boat all have varying ladder setups. Some use the folding style that get folded up and out of the way when not in use and others had larger ones that maybe were fixed. Both setups seemed small enough to not interfere with the install of a cover like the part # 052963889482. I looked up the dimensions of your 2002 Four Winss 180 Horizon and it's dimensions would easily fit the # 052963889482 as well. This cover would work great for you unless you have an unusually...
    view full answer...

  • Fitment Of Classic Accessories Stellex V-Hull Fishing Boat Cover # CA20144 On 12' Boat
  • The Classic Accessories Stellex V-Hull Fishing Boat Cover # CA20144 is designed to fit snuggly on a 12'-14' v-hull boat. The width of the boat should not exceed 68" at the widest point. You want the cover to fit snug so that any wind that hits the boat will not allow the cover to move and possibly chafe, creating wear or damage to the cover. For the outboard motor I recommend finding a cover that will encase the entire outboard. This will help prevent any critters from building nests...
    view full answer...

  • Boat Cover Recommendation for a 2008 Mako 2201
  • Your 2008 Mako 2201 is 21 foot 3 inches long and has a beam width of 7 foot 9 inches. That would work perfectly with the Classic Accessories DryGuard Waterproof Boat Cover # CA20087 that you referenced so I would recommend it for you.
    view full answer...