What Is the Offset of the Loadstar ST175/80D13 Trailer Tire Galvanized Wheel Part # AM3S040
Updated 05/13/2019 | Published 05/10/2019
Question:
Is there any offset on this wheel or are the mounting bolt holes in the center side to side of the wheel?
asked by: Jeremy H
0
Expert Reply:
The Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel part # AM3S040 has a 0 offset which means the mounting surface is lined up directly with the middle of the wheel (side to side). All of our 13" diameter wheels with 4 on 4" bolt pattern have a 0 offset as with most trailer wheels in general as well.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range B
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range B
- 175/80-13
- 13 Inch
- M - 81 mph
- 4 on 4 Inch
- Steel Wheels - Galvanized
- Kenda
more information >
Continue Researching
- Q&A: Looking for Replacement Trailer Axle that is 48 inches Between Spring Seats and has 4 Bolt Pattern
- Q&A: Choosing Between Kenda Karrier and Kenda Loadstar ST175/80-13 Tire
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is Largest Trailer Tire Size that Has 4 on 4 inch Bolt Pattern
- Article: Trailer Tire Sizing
- Q&A: Can ST175/80R13 Radial Trailer Tire Replace 165/80-13 Size Tire on Boat Trailer
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: Recommended 5 on 4-1/2 Lug Nut Pattern 13" Wheels for a Boat Trailer
- Q&A: Can etrailer 2,000 lb Axle be Flipped
- Article: How to Raise Your Travel Trailer Height
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Best Bike Racks for Electric Bikes
- Article: What are the Common Types of Propane Fittings Used on RVs?