Do Polar and Redline T-Handle Latches Have Same Body Dimensions

Question

Question:

Does this have the same basic body as the L4080? will it fit in the same cutout?

asked by: Bob

1

Helpful Expert Reply:

Yes, the Polar T-Handle Latch # PLR5730 has the same body dimensions as the Redline T-Handle Latch # L4080 so you can use one in the place of the other. They will fit the same cutout.

expert reply by: Jon G

1

click to enlarge

Answer 1

The T-Handle Latch - Stainless Steel #PLR5730 has holes 3-3/4 inches on center horizontally and 3-1/4 inches on center vertically. I've attached a photo to assist. The #L4080 has the same dimensions.

view full answer...

Answer 2

Check out the dimension picture I attached for the Latch Part #L4080 that you referenced. I believe the dimension you are looking for is 1/2 inch on all sides from the edge of the latch flange to the center of the mounting holes.

view full answer...

Answer 3

I looked up pictures of several Circle J Outback horse trailers and while I couldn't get a really solid picture of the tack room door handle it looks like it uses a standard door latch found on RVs and other horse trailers which the Global Link…

view full answer...

Answer 4

The Redline T-Handle Door Latch, part #L4080 can be mounted in any position you choose. You will just need to make sure the latching bar will catch, wherever the door latch is mounted. The amount of throw on the latch is 1-1/2 inches. See the…

view full answer...

Answer 5

I attached a picture that has all of the depth dimensions for the Polar T-Handle Latch #PLR5730 that you referenced.

view full answer...

Answer 6

Yes, the T-Handle Latch part #PLR5710 that you referenced does come with rods that attach to the door and pull in on the door releases as the latch is turned. I attached a picture that shows a similar latch and the rods it comes with to show you what…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Do Polar and Redline T-Handle Latches Have Same Body Dimensions

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching