Is Wiring Harness Included with EcoHitch Trailer Hitch for 2015 Subaru WRX

Updated 04/04/2019 | Published 04/03/2019

Products Featured in This Question

EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2"

(181)

$418.57

1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs

(2639)

$13.86

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(52)

$66.19

Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs

(3985)

$29.12

Question:

Hello I was just wondering if this hitch came with anything else like the wiring for a trailer you’d need or the clip and pin? Or is it just the hitch I see in the picture

asked by: Logan

Expert Reply:

The EcoHitch Invisi Trailer Hitch Receiver # 306-X7257 for your 2015 Subaru WRX does not include a trailer wiring harness or pin and clip. It is simply the trailer hitch and the needed hardware to install it. None of our trailer hitch receivers include the wiring harness needed for towing.

To add a trailer wiring harness I recommend the Curt T-Connector # C56259 that will plug right into factory ports behind the driver and passenger side tail lights. You will also need to run a hot lead up to the vehicle's battery. This will provide you with a 4-Way connector to connect with and power a trailer's basic signal lights.

I have attached an installation video that you can use for reference.

To pull a trailer you will also need a ball mount like the Curt # D-4, Hitch Pin and Clip # PC3, with a compatible hitch ball that matches the trailer's coupler such as the 2 inch # 63845 or the 1-7/8 inch # 19260. This particular ball mount includes a hitch pin and clip.

I have also attached a great article on finding the best ball mount for your setup in case the rise/drop on this unit is not sufficient to pull your trailer level.