Replacement Motor and Switch Recommendation for Ventline Range Hood PR-4

Question

Question:

The trailer was built around 1991. It has a 46 inch oVentline oven hood. We need a nw motor and switch. Tho motor has two wires by looks like an AC motor. The switch is a three settings plus OFF. It is a rotor switch. Can you tell me what PN I would need to replace switch and fan motor?

asked by: Scott

0

Expert Reply:

For your Ventline PR-4 range hood the AC power fan motor part # BVD0278-00 is the correct replacement. The replacement switch would then be the part # BL0108-02.

expert reply by: Jameson C

0

click to enlarge

Shawn

4/7/2025

I am looking for the same thing. the switch is not a rocker switch as the original poster stated, it spins. first position........light on second position...fan on third position.......light AND fan on any help would be appreciated

Jameson C.

4/7/2025

@Shawn You'd have to use the mentioned motor and switch if it all needs to be replaced, or are you wanting to do just the motor?

Answer 1

The Replacement Fan Motor for Ventline Range Hoods #BVD0278-00 will definitely be the direct replacement for the Ventline PR-4 you are fixing, but the motor housing is not available separately, unfortunately. Below I have all the replacements parts…

view full answer...

Answer 2

I checked with my contact at Ventline and for your PR-8 100-CFM range hood the correct replacement motor is the part #BVD0278-00. Then for the fan blade you will need part #BCD0409-00.

view full answer...

Answer 3

The correct replacement motor for your fan is the 110-Volt AC Fan Motor #BCD0314-00 which is 100 CFM capacity.

view full answer...

Answer 4

The correct replacement lens for your PR-4 Ventline range hood is the part #BCC0179-00 on our site. I confirmed this is the correct one with my contact at Ventline.

view full answer...

Answer 5

For your Ventline PR-8 100 CFM Range Hood, you can use the Replacement Fan Switch for Ventline RV Range Hood #BL1194-00. This is a 1-speed fan switch made specifically for the Ventline P-Series range hoods.

view full answer...

Answer 6

The fan switch you need is the part #BL1194-00. This is an exact replacement for what you have and will be what you need for the fan and the light. It does not have a label on it though.

view full answer...

Answer 7

Hey Paul! We have the Replacement Fan Switch for Ventline RV Range Hood item #BL1194-00 listed as a replacement for your PR 100 CFM. It sounds like you're describing a switch like item #BV0199-03. The threaded portion of this switch is .368"…

view full answer...

Answer 8

In order to find the correct replacement fan blade to go with your Replacement Fan Motor for Ventline Range Hoods #BVD0278-00 I recommend measuring/inspecting the existing fan blade. We have two options that will fit this motor, both will fit in your…

view full answer...

Answer 9

I spoke to my contact over at Ventline and they mentioned that there are replacement parts available for your older model DPI-1 range hood. I've listed the parts that you're looking for below for you to easily locate. Fan Motor: Replacement…

view full answer...

Answer 10

The correct replacement motor for your Ventline range hood model PR-8 100-CFM is the #BVD0278-00. If you need the fan blade as well, the correct part is the #BCD0409-00. The price for both can be found on the product page below the name of the…

view full answer...

Answer 11

You should be able to remove the Replacement Fan Switch for Ventline RV Range Hood - S0721 Series #BL0108-02 by simply pushing in the tabs on the sides (from behind the range hood) and then pushing the switch out towards you. I have attached some…

view full answer...

Answer 12

Yes! The Replacement Fan Motor for Ventline Range Hoods part #BVD0278-00 is correct for your Ventline Range Hood PR-4. I was able to confirm this with my contact at Ventline. The replacement process is super easy according to our customers. There are…

view full answer...

Replacement Motor and Switch Recommendation for Ventline Range Hood PR-4

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching