How to Remove RV Toilet Floor Flange

Question

Question:

I have a 1998 northlander supreme trailer the flange is cracked at the hold down bolts its connected to the holding tank jow do I get it off and what size would the pipe be is it 3 in.

asked by: Sergio

1

Helpful Expert Reply:

You will need to find a way to twist the flange off as it will be threaded. We have the MPT (Male Pipe Thread) part # T05-0782 and FPT (Female Pipe Thread) # T05-0784 flanges which both are for 3" sewage pipes like what you have on your 1998 Northlander Supreme.

If all of the places where the bolts hold the flange down are cracked and broke off when you removed the bolts then you may need to get a little creative. The flange will likely be a bit of a bear to remove so keep that in mind if you are having difficulty getting it to budge.

expert reply by: Jon G

1

Answer 1

We have the Replacement RV Toilet Floor Flange #T05-0784 which has a 4 inch diameter hole and .541 inches of usable female threads. But if you need something 4 inches long where the threads are we do not have anything.

view full answer...

Answer 2

To find the correct replacement flange for your trailer you'll first need to remove your current flange to see exactly how it was attached. Your current flange could be screwed onto the pipe or glued to it so you'll need to find out which…

view full answer...

Answer 3

Yes, the Replacement RV Toilet Floor Flange #T05-0784 has the standard 4" diameter opening and 3" FPT (Female Pipe Thread) that will match what you have with your Canplas 3634-5 flange. Attached is a review video for you to check out.

view full answer...

Answer 4

Hey Tom, I would first see if your flange is screwed on like the #T05-0784 or #T05-0782. If not and it's glued on you can use a rotary tool with a cutting wheel to cut the pipe from the inside out to avoid pulling the floor. Depending on how they…

view full answer...

Answer 5

Hey Chris, We do have replacement flanges for your RV toilet, you just need to get the right thread type, either MPT or FPT: - FPT: Replacement RV Toilet Floor Flange - 3" FPT #T05-0784 - MPT: Replacement RV Toilet Floor Flange - 3" MPT…

view full answer...

Answer 6

Though we do not carry either of those parts I can still help you out. What you are going to need - depending on how your hose threads - is either the RV Toilet Floor Flange #T05-0784, which has 3" diameter female pipe threads OR RV Toilet Floor…

view full answer...

Answer 7

The Dometic 320 Full-Timer RV Toilet, #DOM27FR is not a direct replacement to your current model. To install the Dometic RV toilet #DOM27FR you'll need the Valterra RV Toilet Floor Gasket with Hold Down Bolts #Q23653VP and either the RV Toilet…

view full answer...

Answer 8

Replacement toilet floor flanges are universal so it will work, but you can determine the correct one based on the threading of your current flange. They will work with 3" pipes which you need to have as well. - Male Thread: Replacement RV…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

How to Remove RV Toilet Floor Flange

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching