Angle Measurements on Aries Headache Rack # AA111001

Question

Question:

What are the angels for the Aries headache rack

asked by: John M

0

Expert Reply:

The outside uprights on the Aries Headache Rack # AA111001 referenced in your question bend inward at a 21 degree angle about 3 inches up from the base. The uprights then straighten back up as they reach the top making another 21 degree angle.

I have attached an image to assist.

expert reply by: Chris R

0

click to enlarge

Answer 1

I spoke to my contact at Aries and he informed me that the outside to outside dimension of the upright portion of the Aries Headache Rack #AA111001 is 70 inches but then if you wanted from the insides of the brackets it measures 69-1/2 inches.

view full answer...

Answer 2

On the Aries Headache Rack #AA111001 the distance between the 2 uprights at the top is 56-1/4 inches. Each of those uprights is 1-7/8 inches front to back and stick up from the top tube by 2-5/8 inches.

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 6

Hi Vincent, Thank you for thinking of us for another hitch for your other vehicle! For your 2004 Ford F-150, the Curt Trailer Hitch Receiver part #13357 is a confirmed fit for your truck! It will work on all models, with or without the vibration…

view full answer...

Answer 7

Hello Xavier, thanks for reaching out. We do offer a 7-way wiring harness for the 2017 Honda Pilot. For that you can use the following: - T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector #118286 The video linked below…

view full answer...

Answer 8

The issue you are going to run into with using most headache racks and crossover style toolboxes together is that they are both fighting for the same mounting space and neither are designed with the thought of using one with the other in mind.…

view full answer...

Answer 9

For a 2003 Chevy Silverado 2500 6-1/2 foot bed we have the part # AA111000 which is a confirmed fit from Aries but the part number you mentioned will not work as it is designed for newer trucks. Another option similar in appearance that is a fit is…

view full answer...

Answer 10

The bed width didn't change between the year models so you shouldn't have an issue with fitment on the 2012 model. If you have the Aries Classic Headache Rack #AA111000 that you were looking at then I can confirm that this will fit the 2012…

view full answer...

Answer 11

The Erickson Over-The-Cab Truck Bed Ladder Rack part #EM07707 is designed to work with chest style toolboxes such as the DeeZee Red Label Truck Bed Toolbox part #DZ8546B. In order to use this ladder rack with a crossover style toolbox like the DeeZee…

view full answer...

Angle Measurements on Aries Headache Rack # AA111001

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching