Do I Need to Ground Wiring Harness C55335 On A Chevy Express Van
Updated 03/11/2019 | Published 03/08/2019 >
Question:
Hello. Bought your t connector kit for my Chevy express van. Wiring connectors are pretty foolproof BUT it calls for grounding a white wire. Every white wire on this harness is tied into a modular plug. There are no extra white wires on the harness or converter box. Your stock picture on your site also shows no extra white wire yet the instructions call for it. Am I missing something? Thanks in advance.
asked by: Stephen K
Expert Reply:
I contacted the tech at Curt and the wiring harness part # C55335 is internally grounded inside the wiring harness. There is not a need to ground the white wire separately because it is built into the wiring harness. The instructions Curt sent were universal instructions. You can just plug into the vehicle's wiring behind the driver's side and passenger's-side rear interior trim panels and it works.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: All Trailer Lights Work Fine Except Brake Lights Will Not Work
- Q&A: Can Ranch Hitch Gooseneck Adapter be Installed on a Curt RotaFlex Pin Box
- Q&A: Where Does a Trailer Wiring Harness Install on a 1996 Chevy Conversion Van
- Q&A: Trailer Wiring Connector for 1999 Chevy Express Van
- Q&A: Working Running Lights, But No Turn Signals or Brake Lights On Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Why Do Some Vehicles Need a Converter to Add Trailer Wiring Like a 2001 Chrysler Town & Country
- Q&A: Where Do the Rubber Bearings Go On the Titan/Dico Model 10 Surge Brake Actuator
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Tire Sizing

