bing tracking image
Q & A Icon

Can Timbren Rear Suspension Kit Fit 2017 Ford F-150 Raptor with 1 inch Lift  

Published 02/25/2019

Question:

Thanks for answering my first question. I’m running the ProRYDE 3-in-1 Adjustable Rear Lift Block Kit and it’s a stackable kit. I was concerned the blocks might come apart if I used your product. Are you familiar with this and if it would still be safe to use with ProRYDE 3-in-1 Adjustable Rear Lift Block Kit

0

Expert Reply:

Most block lift kits just lift the body of the truck and not the suspension as well. This is known as a body lift. Suspension lifts are when the distance from the frame and truck axle increase. If you have a body lift the Timbren kit part # TFR1504R fits without any modification. If you added 1 inch to the distance between the truck frame and axle you'd need the part # TA25723-90AD00 for each side and you'd be set.

expert reply by:
0
Jameson C
John T. profile picture

John T.

2/25/2019

Thanks for answering my first question. I’m running the ProRYDE 3-in-1 Adjustable Rear Lift Block Kit and it’s a stackable kit. I was concerned the blocks might come apart if I used your product. Are you familiar with this and if it would still be safe to use with ProRYDE 3-in-1 Adjustable Rear Lift Block Kit

Jameson C. profile picture

Jameson C.

2/25/2019

Thanks for following up! I checked out your lift and the ProRYDE 3-in-1 Adjustable Rear Lift Block Kit fits between the leaf spring and the axle so it adds distance between the frame and axle. This means you do need a spacer block to use with the Timbren. So you'd need a quantity of 2 of the # TA25723-90AD00.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>