Best Roof Rack for 2013 Honda Ridgeline

Question

Question:

What would be recommended rack for 2013 Honda ridgeline with leer cap. Does rhino make sets with 48 in tracks and aero crossbars ?

asked by: Michael

0

Expert Reply:

While there is not a specific fit for a rack system on your 2013 Honda Ridgeline you can still mount one but you will need to cut the tracks. The reason for this is the tracks are all 63 inches long, which is longer than the bed of your truck. You will only need to know the distance across your cap to get the correct length of crossbar. For example, there is the Rhino-Rack Roof Rack System # Y02-480B which has 54 inch long crossbars or the # Y02-490B which has 59 inch bars.

A better idea would be to put a roof rack above the cab of your Ridgeline, and the fit will depend on if your '13 Ridgeline has factory raised side rails or not. If your DO have raised side rails the Yakima roof rack is going to give you a functional, durable and quiet way to carry cargo. The rack is made up of the following parts:

- Yakima JetStream Crossbars # Y00426 (Black)
- TimberLine Towers for Yakima Crossbars # Y33TR

If you do NOT have raised side rails and instead have a naked roof there is a great option for a quiet, durable and functional roof rack from Thule, which is made up of:

- Thule WingBar Evo Crossbars # TH711520 (Black) OR # TH711500 (Silver)
- Evo Clamp Feet for Thule Crossbars # TH710501
- Fit Kit # TH145191

I have added links to some video reviews of these products for you to check out as well.

expert reply by: Kyle S

0

Answer 1

The easiest and most cost efficient way to add a roof rack to the Leer camper shell you have on your truck would be the Rhino-Rack #Y02-480B. This comes with a track system as well as the crossbars and feet needed.

view full answer...

Answer 2

Yes, if you wanted to cut down the length of the tracks of the Rhino-Rack Roof Rack System w/ 2 Sportz Crossbars #Y02-480B you certainly could. The bars come 54 inches in length and the tracks are 63 inches long.

view full answer...

Answer 3

Howdy from Wentzville, Missouri! For your Undercover shell on your 2001 Ford F-150 supercrew with a 5-foot bed, the system you need depends on how much length and width you have on your shell. For example, If you have a longer shell with moderate…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 8

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 9

Hi Tyson; the answer depends on your A.R.E topper. If you do not have any kind of rails pre-installed I recommend the following: -Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Bars #Y02-480B -Rhino-Rack Aero Bar…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 12

Hi Sancho, Manufacturers haven't had a chance to test fit for the best sizing of their platforms for the 2024 Grand Highlander yet so you'll want to measure yourself to figure out how large of a platform will work for the roof and for your…

view full answer...

Best Roof Rack for 2013 Honda Ridgeline

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching