How to Display Engine Oil Temp and Engine Oil Pressure with the Edge Insight CS2

Updated 03/19/2024 | Published 02/08/2019

Question:

I dont see where oil pressure or oil temp are displayed on this unit ?

asked by: Robert

Expert Reply:

In order to select engine oil pressure (EOP) and or engine oil temperature (EOT) as the parameters that the Edge Insight CS2 Comprehensive Gauge Display part # EP84030 displays on the home screen (if applicable) you will need to follow the six steps I have listed for you below.

Step 1: While viewing a gauge layout screen, press the Enter button. A gauge location will be highlighted.
Step 2: Use the arrow buttons to highlight the gauge location that you would like to modify.
Step 3: Highlight the Select New PID option. Then press Enter.
Step 4: Use the Up/Down arrow buttons to highlight a new PID, then press Enter.
Step 5: Select each of the remaining options to further customize your gauge.
Step 6: Return to the main gauge screen. The new PID will be displayed along with any customized options you may have changed.

Please note that in step 4 you may need to scroll down to the next page in order to find the engine oil pressure and or engine oil temperature parameter. They could also be abbreviated as EOP or EOT respectively. If you still do not see the engine oil pressure and or engine oil temperature parameters then please let me know the year, make, and model of the vehicle as not all vehicles have the ability to monitor these parameters.

expert reply by: Conner L

Ray D.

7/9/2020

I have the cts2 evolution diesel on a 2002 7.3. and I'm not finding the EOP on my guage selection.

Shane S.

3/18/2024

I got a cts3 on my 2002 f250 with a 7.3 and I can’t fine EOP

Mike L.

3/19/2024

@ShaneS In step # 4 of Conner's response above, did you scroll down to the next screen to find the EOP PID? They don't always show up on the same screen, so you'll need to keep scrolling down....