Replacement Bulbs for Wesbar Trailer Tail Light 403025
Updated 02/04/2019 | Published 02/01/2019 >
Products Featured in This Question
Question:
Hello - i have the Wesbar Part # 403025 on my trailer, but its not working so I assume the bulb is out. I believe this is the older generations of the Wesbar submersible low-profile lights because it has a sealed light bulb capsule the red outer case is not replaceable. Since the capsule is sealed, can i replace just the drivers side one thats not working with part # 403026 and just attach the wires? Will it still work then with the passanger side which is part # 403075. I feel like this would be a better option since the 40326 comes with a capsule that allow you to replace the bulbs. thank you
asked by: Deb
Expert Reply:
Wesbar Trailer Tail Light # 403025 is sealed but does not have a replaceable capsule like the older models did. You need only replace the bulbs, types 1157 and 193.
Replacement bulbs # A1157B.
If instead you prefer to install light # 403026 you can do so. It will work and it uses the same bulbs as your current light.
Continue Researching
- Video: Comprehensive Review: Grease Seal
- Q&A: Replacement Grease Seal for Timken 171255
- Shop: Incandescent Tail Light for Trailers over 80" Wide - Submersible - 8 Function - Driver Side
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles with #84 Spindles
- Shop: Timken 473336 Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles
- Shop: Grommet for Optronics A91, AL82, AL90, AL91, or AL191 Series Trailer Lights - Black PVC
- Search Results: wesbar~trailer~lights
- Search Results: trailer strap
- Search Results: 403025
- Search Results: winch strap
- Q&A: What is Normal Temperature Rating for Trailer Hubs
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer hitch
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Suspension Enhancement
- Article: Most Popular Wheel Bearings
- Search Results: trailer wiring
- Shop: Brake Controller
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Gooseneck Hitch
- Shop: Base Plate for Tow Bar
- Shop: Fifth Wheel Hitch