Availability of Lippert Components Flip Down Slotted Rack Tailgate Storage System # LC243621

Question

Question:

I was wondering if you guys sell lippert bike carrier sku#243621? Thanks

asked by: Jeff K

0

Expert Reply:

Yes we do carry the Lippert Components Flip Down Slotted Rack Tailgate Storage System # LC243621 that you referenced! This is a bumper mounted fold down rack with a 200 lb capacity.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Since you do not have the 4" of clearance to mount the Installation Hardware #LC373965 for the Lippert Components Flip Down Slotted Bike Rack Tailgate Storage System #LC243621, you will need the Lippert Tailgate Storage System Mounting Kit -…

view full answer...

Answer 2

Hi Tony; thank you for the picture. The Gen-Y pin box you looked at is designed for a Lippert 1621 bolt pattern. Based on your sticker Lippert says you have a Rhino Box bolt pattern so you will need a different Gen-Y adapter. You also need to follow…

view full answer...

Answer 3

Hi Jeff, To pick out the correct Gen-Y Gooseneck Pin Box you'll need to know your trailer's fully loaded pin weight and bolt pattern. You should be see a white sticker somewhere on your current pin box or on the body of the trailer right next…

view full answer...

Answer 4

The Lippert Tailgate Storage System Mounting Kit part #LC432336 which is what you will need to use to install the Lippert Components Flip Down Slotted Bike Rack Tailgate Storage System part #LC243621 is compatible with I-beam frames. I have attached…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The 24x84 etrailer Cargo Carrier for RV Bumper part #e96ZR can hold a spare tire but there isn't any sort of specific mount for this. The photo attached below is a custom job from a neighbor and I'm not totally sure what they used to create…

view full answer...

Availability of Lippert Components Flip Down Slotted Rack Tailgate Storage System # LC243621

Product Page this Question was Asked From

Continue Researching