B&W Headache Rack Compatibility with Tonneau Cover on 2019 Ford F-350
Published 12/11/2018
Products Featured in This Question
Question:
I need a Headache rack to work with my Extang Toneau cover above rails. I have a 2019 F 350 dually, will this or do,they make one to work with a Toneau cover ?
asked by: Dennis
Expert Reply:
The B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights - Black Powder Coated Steel # BWPUCP7502BA needs to be installed before a tonneau cover and will work with only with certain tonneau covers that have the inside the bed rails but wont' work with systems that have the interlocking rail like # BAK39331 that require a perfectly square rail. The thickness of the brackets for the headache rack will change the tonneau brackets so you may need to make modifications for fit. They are not tested for use with tonneau covers, so if modifications to the products are needed those won't be covered under warranty.
The internal dimension of the uprights is 68 inches at the base, so if your cover is above the rails, you will need to measure to determine fit. I've attached a photo to assist.
Product Page this Question was Asked From
B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights - Black Powder Coated Steel
- Headache Rack
- Louvered Headache Rack
- Drilling Required
- Steel
- Includes Mounting Hardware
- With Lights
- With Load Stops and Tie-Downs
- Black
- B and W
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Q&A: Easy Way to Wire B&W Custom Headache Rack to Truck
- Q&A: Wiring Frontier Gear Headache Rack Lights Into A 4 Way Flat Trailer Connector On 2019 Ford F-150
- Q&A: Different Ways to Wire a Lighted Headache Rack
- Shop: Hopkins Endurance Easy-Pull Harness w/ 4-Pole Flat Connector - Trailer End - Jacketed - 48"
- Shop: Quick Fix (TM) 4 Pole Flat Trailer End
- Shop: Curt 4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps
- Q&A: Replacement Bushing For Dexter 5-Leaf 10,000 Pound Axle Slipper Spring DX45QR
- Q&A: Specs for the Dexter 5-Leaf Slipper Spring W/ Flat End for 10K Axles
- Q&A: Axle U-Bolt Recommendation for Kaufman Trailer with 10k Axles
- Q&A: Recommended Hardware for Dexter Equalizer for 2-1/2" Wide Slipper Springs # 13-141-3
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: Performance Chips and Modules
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Gooseneck to 5th Wheel Adapters
- Article: Stability Control for Heavy Duty Vehicles