Will Curt Trailer Hitch # C11256 Fit 2019 Nissan Versa Sedan

Question

Question:

will the 2018 setup work with the 2019 nissan versa sedan?

asked by: Jon

1

Helpful Expert Reply:

I have good news!

The Curt Trailer Hitch Receiver # C11256 referenced in your question that fits the 2018 Nissan Versa is also a confirmed fit for your 2019 Nissan Versa Sedan. The Class I hitch will use existing holes in the vehicle's frame for a no-drill installation and it features a 200 pound tongue weight capacity.

I have attached an installation video on the 2016 Versa that you can use for reference. The process should be pretty similar for your 2019 model.

Please just note that if you plan on using the hitch for a non-trailer load such as a bike rack or cargo carrier, Curt does require that you add a stabilizing strap # 18050. I have attached a short video demonstration on this strap so you can see exactly how it is used.

expert reply by: Chris R

1

Garrett

3/13/2020

Will the 2019 nissan versa sedan tow hitchfit on2020 nissan versa sedan?

Chris R.

3/13/2020

As of this writing (March 2020) there isn't yet a confirmed hitch fit for the 2020 Versa, so I can't verify that the same model from the 2019 Versa will fit the new vehicle. As soon as something is confirmed we will definitely have it up on our site via the vehicle fit guide.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…

view full answer...

Answer 3

Hey Doug, I checked with Curt and their hitch part #C58VV is a confirmed for all models of the 2026 Lexus RZ350e including the electric model so it would work great for you. Do you have a bike rack already? What kind of bikes do you have?

view full answer...

Answer 4

The Hollywood Racks Trail Rider 2-Bike Rack #HR200 weighs about 35 lbs. The Swagman XC 2-Bike Rack #S64650 is lighter at about 26 lbs. The biggest difference between the two is the Swagman rack is rated for 2 bikes at 35 lbs each and the Hollywood…

view full answer...

Answer 5

Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…

view full answer...

Answer 6

The Swagman XTC4 4-Bike Rack #S64665 and Hollywood Racks Destination 4-Bike Rack #HR4000 are two of the best values in regards to 4-bike racks, and when taking everything into consideration I highly recommend the Destination #HR4000. There are a…

view full answer...

Answer 7

Hey Gregory, thanks for reaching out. Yes the Curt #C13195 hitch is exactly what you'll need for carrying a few bikes on the back of your 2020 Hyundai Santa Fe. it has a 2" receiver and 750 lb tongue weight capacity so 4 bikes will not be a…

view full answer...

Answer 8

Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…

view full answer...

Answer 9

Hey Chris! The Hollywood Racks CrossTrack Bike Rack part #HLY98RR already comes with a hitch lock so no need to get one separately! There is also an integrated cable lock to wrap around your bikes as well. The CrossTrack is expandable so that you can…

view full answer...

Answer 10

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

view full answer...

Answer 11

It sure will Nick! The closest portion of the Benton ShiftShow Bike Rack item #B56VR is 8-3/8" away from the hitch pin hole. We've taken a few measurements off of hidden hitches installed on 2023 Grand Cherokee's and the hitch pin hole…

view full answer...

Answer 12

Hi Jebs! When we installed our etrailer hitch #e98840 on a 2018 Honda Pilot, we found the center of the pin hole sat 4-1/2" back from the bumper. You will of course want to measure this on the hitch you have already as it may be different, but…

view full answer...

Will Curt Trailer Hitch # C11256 Fit 2019 Nissan Versa Sedan

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching