How to Mount a Detail K2 Snowplow on a 2011 Jeep Wrangler

Question

Question:

Hi I bought a k2 plow for a jeep liberty last year, Plow works fine but not pleased with the liberty ,so I bought a wrangler and need the mounting kit #K284219.I just want to verify that this fits a Jeep Wrangler 2011. Is it in stock and how fast will it ship. Thanks PS do you have pictures of the mounting kit installed

asked by: Ed

0

Expert Reply:

The Custom Mounting Brackets for Detail K2 Snowplows part # K284219 is indeed a confirmed fit for your 2011 Jeep Wrangler so long as it is the 4x4 version. This mounting kit is exactly what you need to use your Detail K2 Rampage II Snowplow part # K2RAMP8219.

We do have a photo of a customer who is using this mount kit on his Wrangler with a similar snowplow which I have attached for you but detail is limited. The shipping times will be displayed upon checkout.

expert reply by: Conner L

0

click to enlarge

Answer 1

Hey Drew, The media uploader tells me that everyday so I can just email you separately for pics. Most likely you'll need the Detail K2 Storm II Elite Snowplow #K2STOR8422ELT and bracket kit #K284219 in order to clear the bumper and winch. These…

view full answer...

Answer 2

All of the Replacement Round Spring Bars for the Fastway e2 Weight Distribution systems, #FA94-02-1099, #FA94-02-0899, and #FA94-02-0699, measure 31-1/2 inches long. The diameter of the bar at the upper end is 1.39 inches, and the inside groove…

view full answer...

Answer 3

What comes with the Plow Mount part #K284219 that you referenced is what's in the picture I attached. The crossbar type portion of the plow setup is on the plow side of the setup like with #K2RAMP8219.

view full answer...

Answer 4

The black wire of the #K2WR100 does run to the negative post of the battery. I attached a picture that shows how it wires up. The picture might look a bit different since it's an older model but the wiring is the same.

view full answer...

Answer 5

The correct Custom Mounting Brackets for SnowBear Snowplows for a 2021 Jeep Gladiator 4WD is part #K284219. This will then allow you to mount a plow such as the Detail K2 Summit II Elite Snowplow part #K2SUMM8826ELT. If you have a 2WD model then…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

Hi Rodger; if your 2023 Forest River Georgetown GT7 36K7 has a Lippert screen door and it measures 24", 26", 28", or 30" you can use the Lippert Screen Defender. You will need to measure your existing door from edge to edge and…

view full answer...

Answer 9

Hey Gary. The Blue Ox Base Plate Kit item #BX1133 is designed specifically for the Winter Edition bumper that came with the 2017 Jeep Wrangler. If you have the standard factory bumper on your 2017 Jeep Wrangler Sahara you'll need the Blue Ox item…

view full answer...

Answer 10

The only hub we have that is associated with a 3/4 inch spindle is #AH15450ECOMP. This is an agricultural hub that takes inner bearing #LM67048 and outer bearing #LM11949. But the spindle it fits on is not straight, it is tapered, #TRU54FR. If this…

view full answer...

How to Mount a Detail K2 Snowplow on a 2011 Jeep Wrangler

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching