Can the Yakima SpareRide Bike Rack be Used on an RV Spare Tire  

For your 2017 Jayco Jay Flight SLX 267BHSW travel trailer, I recommend the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames #UF35-946403. This is a very nice weld on option adjustable from 47-1/8 to 77 inches. For a bolt on option, I…

If the roof of your pop up has a track/channel on top of it for mounting roof accessories the SportRack Pop-Up Camper Roof Rack #SR1020 that you referenced would not require drilling as the channel nuts would slide into the track and you'd attach…

No it is not, to install this SportRack Pop-Up Camper Roof Rack #SR1020 you need to drill 1/8 inch holes through the exterior of your camper, and then use the self tapping screws to hole the rack to the camper.

According to Yakima, the SpareTime Bike Carrier should NOT be used on towed trailers or campers. The combined weight of the bikes and the rack is not really the issue, rather the fact that the rack will be subject to the additional jarring and…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.