How to Mount the Tekonsha Prodigy RF Wireless Trailer Brake Controller
Updated 08/07/2018 | Published 08/04/2018
Question:
Is it imperative that I mount the controller with the cable toward the front of the trailer? The cleanest way to mount it on my Casita trailer is with the cable facing toward the rear. Otherwise I need to use different bolts and some kind of mounting plate.
asked by: Steve
0
Expert Reply:
The Tekonsha Prodigy RF Wireless Trailer Brake Controller part # TK94FR must be mounted within ± 5 degrees of level on the horizontal plane and must be lined up so that the power cable extends toward the tow vehicle for the internal sensor to function properly.
I have attached a photo of this for you.
expert reply by:
Conner L
0
click to enlarge
Continue Researching
- Shop: Brake Controller
- Shop: Curt Echo Wireless Brake Controller - 7-Way Plug-in w/ Bluetooth App - Up to 2 Axles - Proportional
- Q&A: Replacement 7-Way Cable for a Tekonsha Prodigy RF Wireless Brake Controller
- Q&A: Recommended Wireless Brake Controller for Easy Towing of Trailers Without Physical Mounting Required
- Shop: Windshield Covers
- Shop: Trailer Wiring
- Shop: etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 2-3/4" Rise - 7,500 lbs
- Shop: etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 4" Drop - 7,500 lbs
- Q&A: Recommended 7-Way Connector w/ Dual Trailer or Male Connectors
- Q&A: Recommended Method For Installing Longer 7-way Trailer Connector Harness On Trailer W/ 9' Deck
- Shop: TorkLift Wiring Harness Extension - 7-Way RV - 10' Long
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Hitch Installation Tips