Dexter Trailer Coupler Without Adjustable Channel

Question

Question:

I need a new coupling similar to the T4837800, but dont need the channel. Can that coupling be bought without the channel? Thank you

asked by: Scott R

0

Expert Reply:

Yep, you sure can; the Dexter Trailer Coupler # T1882000 is what you are looking for.

expert reply by: Kyle S

0

Answer 1

Dexter hub drum assembly #8-219-13UC3 is a replacement for your hub drum according to my contact at Redneck Trailer Supply. This is rated for 7K, has a 8-on-6-1/2 bolt pattern and 9/16-inch studs. You can also identify compatible replacement…

view full answer...

Answer 2

To determine the correct replacement equalizers, bushing, wet bolts, shackles straps, etc. you'll need to do a bit of measuring first. The manufacturer designed the suspension to sit in a specific way so that it can roll back and forth so…

view full answer...

Answer 3

The combined weight rating of the two leaf spring sets (one on each side of the axle) needs to match the capacity of the axle. This means for a 7,000 pound axle each spring set will have an individual capacity of 3,500 pounds, such as with the 6-Leaf…

view full answer...

Answer 4

Top to bottom the mounting holes on Titan Trailer Coupler #T2330900 are spaced 2 inches apart on center. The inside width between the holes is a hair under 3 inches. The coupler by itself is #T1882000 if you determine that it will fit the channel…

view full answer...

Answer 5

The Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links #AP233 is not only for under 3,500 lb axles. It is for 33 inch spacing. The Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye…

view full answer...

Answer 6

Based on the serial number you provided my contact at Dexter was able to confirm that your axle uses the following components: Inner bearing #14125A Outer bearing #25580 Grease seal #RG06-070 Braking Assemblies Left #23-464, and Right #23-465 Hub and…

view full answer...

Answer 7

In terms of ride quality and handling there is no difference between the Equa-Flex #LC279687 and the Road Armor #LC696740. However, both will be a great upgrade over what you have now. Between these and other cushioned equalizers the best option is…

view full answer...

Answer 8

There is a heavier duty version of the etrailer Suspension Kit for Tandem-Axle Trailers item #e99ZR and it has the wet bolts and bronze bushings you are looking for. It's the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers item…

view full answer...

Answer 9

Thank you for providing the picture. However you hit that wood it managed to shove the one side up so far it pushed the other side into that position which prevented your wheel from coming back down. I wouldn't say something was necessarily…

view full answer...

Answer 10

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 11

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 12

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Dexter Trailer Coupler Without Adjustable Channel

Product Page this Question was Asked From

Continue Researching