Replacement Stainless Steel Thumb Turn Cam Latch Cylinder that is 1-3/8 Inches Long

Question

Question:

I would like to replace my corroding locks with stainless steel ones. My current cylinders are 13/8” long. Do you have that size in stainless steel?

asked by: Gary L

0

Expert Reply:

Yes, we sure do! For a stainless steel 1-3/8 inch long thumb turn cam latch cylinder use # 295-000013.

expert reply by: Michael H

0

click to enlarge

Answer 1

The Replacement Thumb Turn Cam Latch Cylinder part #295-000012 has a 3/4" diameter with 1-1/8" long body measured at the threads. This appears to match what you have listed in the photos so it should be a direct fit replacement by just…

view full answer...

Answer 2

The Replacement Thumb Turn Cam Latch Cylinder - Stainless Steel - 1-3/4" Long #295-000014 has a diameter of 0.72 inches on the threaded part and 0.63 inches width between the two flat sides. The larger ring where it mounts is 0.89 inches in…

view full answer...

Answer 3

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 6

Hey Bert, yes the LaSalle Bristol Valve part #34466N4AB96GMA that you referenced is exact same as their part number 66N4AB96GM.

view full answer...

Answer 7

According to my research, the Artis PDS1RV25 water pump is a 12 volt, 3 gallon per minute pump, and we do have the perfect option for a replacement: - Flow Max RV Fresh Water Pump #LC689052 This is also a 12 volt, 3 gallon per minute pump, though it…

view full answer...

Answer 8

The closest match we have for a Dexter Trailer Leaf Spring 072-099-00 is the 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles part #e22YR which will be an exact fit. The only difference being a slightly higher capacity of 4,000 lbs compared to the…

view full answer...

Answer 9

I reached out to Dometic who bought Atwood and they don't have any information on an Atwood MPD 91232 hot water heater. The closest direct replacement is likely the Dometic RV Water Heater #DMC74FR. I'm not sure what your current tank…

view full answer...

Answer 10

Whatever bearing kit you got likely came with both to give you options. Since you already had a tang washer on your spindle you can stick with the tang washer. Using the tang washer like the #5-101 with a D washer like the #5-23 would give you no…

view full answer...

Answer 11

The Furrion #FACR15SA-PS 15,500 BTU unit that you referenced is a replacement for Furrion only and is not offered with compatible ceiling distribution box. I do have a solution though. To replace your Single-Zone, Stand-Alone Dometic Duo-Therm Brisk…

view full answer...

Answer 12

Hello Susan, thanks for reaching out. We do offer one 36" fireplace, the Greystone 36" Electric RV Fireplace with Crystals and Mirrored Glass #LC66AF. I tried looking up the Greystone SF103-35 but I was not able to find anything that showed…

view full answer...

Replacement Stainless Steel Thumb Turn Cam Latch Cylinder that is 1-3/8 Inches Long

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching