How to Operate the Left Jacks of Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System

Updated 06/19/2018 | Published 06/18/2018

Question:

After the auto level operation done I still have to raise the left side of my Fithwheel, what do I have to do to raise the left side of it only?

asked by: Rhéal H

Expert Reply:

You can use the left side jacks of the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC358590. This is how to do so, according to the manual:

Landing gear jacks can be operated any time the system is “ON”. By pushing the “FRONT” button, both front or landing gear jacks can be extended. By pushing either the “LEFT” or “RIGHT" buttons, the individual front jacks can be extended. If the touch pad is put in the retract mode, indicated by the orange illuminated LED next to the “RETRACT” button, the front jacks can be retracted together by pushing the “FRONT” button or individually by pressing “LEFT” or “RIGHT” buttons, while simultaneously pressing the “FRONT” button.

The rear jacks can only be extended when the touch pad is in the manual mode. Once system is in manual mode, pressing the “REAR” button will extend both rear jacks at the same time. To extend individual rear jacks, press the “LEFT” or “RIGHT” buttons while simultaneously pressing the “REAR” button depending on which jack needs to be operated.

If the touch pad is put in the retract mode, indicated by the orange illuminated LED next to the “RETRACT” button, the rear jacks can be retracted together by pushing the “REAR” button or individually by pressing either the “LEFT” or “RIGHT” buttons, while simultaneously pressing the “REAR” button.

NOTE: If the rear jacks will not operate individually using the method described above, but they operate properly when Auto Level is performed, the Twist Prevention Protection system has locked out the operation to prevent damage to the frame of the unit.

expert reply by: Kyle S