Replacement Fender for Thule Utility Trailer  

The Fulton Single Axle Trailer Fender with Top Step - White Plastic - 12" Wheels - Qty 1 #F008542 mounts using brackets like the Mounting Brackets for Trailer Fender - 8"/12" Wheels - Galvanized Steel - Qty 2 #CE26061G-2.…

I recommend using the Fulton Single Axle Trailer Fender #F008542 if you are wanting to mount the fender on the inner wheel flange. The Fulton Single Axle Trailer Fender #F008540 uses Mounting Brackets #CE26065PGA to hold the fender in place. It…

I do have an option for you but the closest sized fender we have for what you're looking for is the Fulton Single Axle Trailer Fender with Top Step part #F008542 which measures 23-11/16" long x 7-1/2" wide x…

Yes you need to use brackets like part #CE26065PGA or #CE26061G to install the Fulton Single Axle Trailer Fender with Top Step #F008542. Basically you just secure one side of the bracket to your trailer and then the other side of the bracket to the…

You would choose a side wind or top wind jack based on several factors. Each has its advantages. If clearance is an issue for the radius of a top wind, then you would choose a side wind. The opposite is also true. It is my experience that a side…

We recommend having about 4" of clearance height-wise to account for suspension movement and at least 2" width-wise between your tire and trailer fender or trailer frame like part #HP66VR that was referenced. Since you are building…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…