Breaking Down the Mounting Brackets for Trailer Fender Video

The Single Axle Trailer Fender #HP56VR is made of 14 gauge steel and has one edge that is a 90 degree angle to weld it to your trailer and the other has a more rolled edge. The strength of the fender and ability to hold 200 lbs is based on your…

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

The Fulton Single Axle Trailer Fender with Top Step - White Plastic - 12" Wheels - Qty 1 #F008542 mounts using brackets like the Mounting Brackets for Trailer Fender - 8"/12" Wheels - Galvanized Steel - Qty 2 #CE26061G-2. I've…

The CE Smith Single Axle Trailer Fender part #CE17100ATB that you referenced has a radiused lip on both sides of the fender. It can still be bolted on though as the fender lip does go flat. It will set flush to the side of your trailer, but the round…

For the carpeted bunks part #CE27840 that are in the review video that I attached the easiest way to install them would be to use the swivel brackets part #CE10000G-4 which I attached a review video of as well. I also attached a picture that shows…

Yes you certainly can. In order to bolt-on a set of metal weld-on fenders such as the Single Axle Trailer Fender part #HP29VR you will need a set of mounting brackets such as the Mounting Brackets for Trailer Fender part #CE26098G-2. If you do not…

When installing the etrailer Horizontal E-Track part #e65VR we generally use a rubber material that is generally used as a liner in garden ponds as an isolator for the two dissimilar metals. It is easy to cut into strips and place under the full…

You can definitely install the galvanized steel e-track on your trailer that has a galvanized steel floor, as really the only potential issues are when installing e-track on dissimilar metals. So you can absolutely install any of the following…

I recommend using the Fulton Single Axle Trailer Fender #F008542 if you are wanting to mount the fender on the inner wheel flange. The Fulton Single Axle Trailer Fender #F008540 uses Mounting Brackets #CE26065PGA to hold the fender in place. It uses…

It looks like the Harbor Freight Folding Trailers use a Jeep style fender so if that's the case then the best option we have for replacement is the Single Axle Trailer Fender part #HP99VR which will work just fine with 4.80x12 tires. That said,…

I do have an option for you but the closest sized fender we have for what you're looking for is the Fulton Single Axle Trailer Fender with Top Step part #F008542 which measures 23-11/16" long x 7-1/2" wide x 8-11/16" tall. This is…

The Fulton Single Axle Trailer Fender #F008559 referenced in your question is designed for use with 8 to 12 inch diameter wheels. If this is what you have, then the Fulton Fender should work as a replacement, however you may need to fabricate your…