Recommended Wiring Harness for 2008 Toyota Tacoma to Connect to Boat Trailer

Updated 06/05/2018 | Published 06/01/2018

Products Featured in This Question

Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(21)

$58.34

Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter

(262)

$21.84

Question:

boat trailer 4 or 5 flat which hopkins adapter will work on a 2008 Toyota tacoma

asked by: Rick M

Expert Reply:

It sounds like you are needing a 4-Way or 5-Way flat connector on your 2008 Toyota Tacoma to connect with your boat trailer.

If you do not yet have any connector installed, I recommend the Hopkins Plug-In Simple Wiring Harness # 33355. This custom harness will plug into factory ports located behind the rear bumper (on the driver and passenger side). This will provide you with a 4-Way flat connector.

If your boat trailer is equipped with a 5-Way connector, then you can simply add an adapter like the Tow Ready # 20036. This will plug right into the above-mentioned 4-Way and give you a 5-Way flat on the other end. The additional blue wire can be spliced into the reverse light wire on your truck.

I have attached a couple short video demonstrations on these harnesses that you can check out.

expert reply by: Chris R