Wiring a 5 Flat That Has 8 Wires
Updated 05/01/2018 | Published 04/29/2018 >
Products Featured in This Question
Question:
On my boat trailer I have 8 wires going to a 5 flat plug. Im looking to wire in a new 5 flat, but I cant find a 8 wires to a 5 flat plug. Do you know where I can get a new 8 wires to 5 flat plug pig tail so I can replace my old 5 flat plug?
asked by: Chad
Expert Reply:
There is not going to be a 5 flat that has 8 wires; the functions of the 8 wires are likely ground, running light circuit (split into 2 wires at the plug), left turn, right turn, brake lights (possibly split at the plug), and output to reverse lockout. What you will need to do is use a circuit tester such as # PTW2993 to determine the functions of the wires and wire them to 5 flat # A40W5B in the traditional manner of a 5-way which is ground, running lights, left turn/brake, right turn/brake and reverse electric lockout. I have added a link on trailer wiring which details the functions of the wires and how they normally connect for you to refer to.
Product Page this Question was Asked From
40 Ft 5-Way Trailer Wiring Harness - Wishbone Style - 30" Ground - 5' Auxiliary Wire
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- No Converter
- Universal Fit
- 5 Flat
- Plug and Lead
- Splice-In
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: hba~16
- Search Results: custom fit vehicle wiring
- Search Results: trailer wiring
- Search Results: king pin
- Search Results: stl69
- Shop: etrailer Electric Trailer Jack w/ 7-Way - Drop Leg - A-Frame - 22-1/2" Lift - 5K
- Shop: etrailer Electric Trailer Jack - Drop Leg - A-Frame - 22-1/2" Lift - 3,500 lbs
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: Curt Universal Fifth Wheel Base Rails - Gloss Finish
- Search Results: landing gear trailer jack
- Search Results: dpr2516
- Shop: Replacement Caliper Retaining Shoulder Bolt for Dexter 10,000-lb to 12,000-lb Hydraulic Disc Brakes
- Shop: etrailer Electric Trailer Jack - Drop Leg - A-Frame - 18" Lift - 3,500 lbs
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Video: How to Install the Curt Trailer Hitch Receiver on a 2019 Cadillac XT5
- Video: A Closer Look at the B&W Tow & Stow Ball Mounts Serrated Hitch Mounted Step
- Q&A: Replacing 5-Way on Trailer that Has 8 Wires
- Q&A: Replacing 5-Way Connector with 8 Wires on Boat Trailer
- Q&A: Recommended Replacement 5-Pin Wishbone Harness for a Boat Trailer
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: Will DeeMaxx 10" Disc Brakes Fit with 14" Americana Wheels?
- Article: Trailer Lighting Requirements
- Q&A: Old Trailer Wiring 5-Way had 6 Wires But New 5-Way Has 5 Wires
- Q&A: Can Larger 3,500 lb Brake Rotor Be Used As Replacement On Trailer
- Q&A: Are There Pre-Greased Versions Of The Dexter 008-435-05 Hub/Rotor
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Hitch Installation Tips
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer




